What Are The Dimensions Of The Jacketed Wire # 10-2-1
Updated 04/11/2014 | Published 04/10/2014
Products Featured in This Question
Question:
What is the overall width and thickness of this wire? Im wanting to buy this wire for my trailer brakes and run it through a rubber grommet so Im needing to know the OD of the wire so I can buy the correct grommets.
asked by: Patrick
Helpful Expert Reply:
I went to our warehouse and pulled some of this Jacketed 2 Wire, part # 10-2-1, to measure for you. The width of the 2 wires with the jacket measures .395 inches. It measures .226 inches thick. Each individual wire when removed from the jacket measure .170 inches. This is a heavy 10 gauge wire and you can order this by the foot.
I have also attached links to some of the connectors that can be used with this wire.
Product Page this Question was Asked From
Deka Jacketed 2 Wire, 10 Gauge, Brake Wire - per Foot
- Wiring
- Wire
- Jacketed Wire
- 2 Wire
- 10 Gauge
- Deka
more information >
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How to Use the 7 Way Plug to Power a Fuel Pump
- Q&A: What Wiring and Brake Controller do I Need for My 2005 Ford F-150 with 4 Flat Wiring?
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Will the Jacketed ABS Trailer Cable Per Foot Work w/the Pollak 7-Way Trailer Socket?
- Q&A: How to Wire Electric Brakes on a Tandem Axle Trailer
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Q&A: Are 7k Brake Assemblies Available in Left and Right Hand Side Individually
- Q&A: Which Trailer Axle Company is Best, Lippert Dexter or Al Ko