Do you Have a Trailer Axle With 85" Hub Face to Hub Face For 3,500LB Trailer Hubs?

Published 11/30/2023

Products Featured in This Question

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased

(1341)

$86.03

Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased

(1527)

$44.59

Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 3,500 lbs

(131)

$1004.03

Trailer Axle w/ Electric Brakes - Easy Grease - 6 on 5-1/2 - 86-1/2" Long - 6,000 lbs

(273)

$579.20

Question:

I recently purchased AKHD-655-35-K and AKIHUB-655-35-K hubs for my duel axle trailer and neither fit the existing axles. What axles can I use to replace my existing that these hibs will fit. My axle length is approximately 85 inches from outer hub to outer hub

asked by: James K

Expert Reply:

The closest axle hub to hub width we have to 85" is our 86-1/2" 5,200LB Axle # e73SR. This axle will not fit your current hubs you purchased but it does come with brakes and hubs already.

To use the Hubs # AKHD-655-35-K & # AKIHUB-655-35-K you purchased and mount to the 85" hub face you would need to replace your axles with the Timbren Axle-Less Trailer Suspension # ASR3500S05. Otherwise you would need to visit a local axle dealer to have custom axles ordered. The Timbren has its own built in suspension so you would bolt it directly to your frame for both axles after you remove all the current suspension components you have.

expert reply by: Bud M