Replacement Hub and Spindle For Trailer Using Tapered Spindle With Timken 24780 and 10183 Bearings
Updated 11/27/2023 | Published 11/26/2023
Products Featured in This Question
Question:
Im looking for a hub and bearing kit that fits a tapered spindle. The inside diameter size is 1.625 previous hub had a timken 24780 for the inside bearing. The outside diameter is 1.253 previous hub had a timken 10183. This number may not be correct, the numbers are very small and hard to see. Any help would be greatly appreciated. Thank you.
asked by: Scott
Expert Reply:
I do have a recommendation for you as we do not carry a hub which will work with your current spindle. Instead you can replace your spindles with the more commonly found #42 Spindle # TRU57FR. This will allow you to easily slide on a hub for a 6 on 5-1/2" Bolt Pattern # AKIHUB-655-6-K or one with the 8 on 6-1/2" bolt pattern # AKIHUB-865-7-2-K. Both these hubs include pre packed bearings, races and grease seals for easy installation.
Product Page this Question was Asked From
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- Without Flange
- 25580
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Continue Researching
- Search Results: trailer bearings
- Video: Review of TruRyde Trailer Hubs and Drums - Hub with Drum - TRU98AV
- Search Results: 15245
- Search Results: 15123 bearing
- Search Results: 15123
- Shop: Timken Bearing Kit, 15123/25580 Bearings, 15245/25520 Races, 413470 Seal
- Shop: Timken Bearing Kit 15123/ 25580 Bearings, 15245/25520 Races, 412920 Seal
- Shop: Dexter Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Video: The Low-Down on the Grease Seal
- Video: Review of etrailer Trailer Bearings Races Seals Caps - Bearing Kit - BK3-110
- Shop: Grease Seal 29031
- Shop: Replacement Race for 15123 Bearing
- Shop: Bearing Kit, 15123/ 25580 Bearings, 10-36 Seal
- Search Results: 126b2
- Q&A: Availability Of Replacement For AL-KO 5/8 Hub Assembly 568215
- Search Results: 23~402
- Search Results: 7~244
- Video: Install: etrailer Electric Trailer Brakes on a 2019 Grand Design Reflection 150 Fifth Wheel
- Video: Comprehensive Review: Replacement Shoe and Lining for Nev-R-Adjust 12" x 2" Electric
- Video: Setting up the etrailer Electric Trailer Brakes on a 2017 Grand Design Reflection Fifth Wheel
- Q&A: Brakes Parts for Jayco With 5k Dexter Axle With 12" x 2" Dexter Nev-R-Adjust Brakes
- Q&A: What is the Four Bolt Brake Mounting Flange for 8,000 Lb Axles
- Q&A: Overall Length of the Demco DM8104311 Surge Brake Actuator
- Q&A: Removing and Replacing Trailer Spindles
- Q&A: How to Distinguish Between Agriculture and Standard Trailer Hub
- Q&A: Drum Brake Surge Brake Actuator Comparable to Demco DM8104311
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
on Trailer Spindles
