Does the Pilot Hole Diameter Have to Match My Hub on the Dexstar Conventional Steel Wheel?
Updated 11/12/2023 | Published 11/11/2023
Products Featured in This Question
Question:
Dexstar Conventional Steel Wheel with Offset - 14 x 5-1/2 Rim - 5 on 4-1/2 - Black The pilot for my hub is 2.5 is this the correct size wheel. Other specs match up. Thanks in advance
asked by: Bruce M
Expert Reply:
The Dexstar Conventional Steel Wheel item # AM20304 for black or item # AM20334 for white both have a 2.62" pilot diameter. The wheel's pilot diameter only matters if you're needing a hub centric wheel. A hub centric wheel will use lug bolts instead of lug nuts to attach the wheel to the hub. As long as your wheel is attached with lug nuts and not wheel bolts this will work for you.
Product Page this Question was Asked From
Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black
- Trailer Tires and Wheels
- Wheel Only
- 14 Inch
- 5 on 4-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Q&A: 13 inch Trailer Rim Recommendation that can Take Baby Moon Wheel Cover
- Q&A: 14 Inch Trailer Wheels With an Offset
- Q&A: Changing from a 13 Inch Trailer Tire and Wheel to a 14 Inch on 3500 Pound Trailer
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Q&A: Looking For 14" Wheel That Can Be Used With Baby Moon Hubcaps
- Q&A: How Wide of a Rim is Recommended for the Tire Size ST225/75R15
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Trailer Tire Sizing
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure for Trailer Hitch Drop
- Article: Which Sway Control Hitch is Right For Your Trailer?