Recommended Replacement Clearance Lights With Only Wire
Updated 10/30/2023 | Published 10/28/2023
Products Featured in This Question
Question:
I have a really old trailer that only has 1 wire running to each light. I was able to replace the brake lights but all the marker lights have 1 wire behind them and look like the screw holding it in is the ground. Looking on your sight for 7 red and 7 amber 1 wire marker lights to help me refurbishing this trailer.
asked by: Matt R
Expert Reply:
It's normal for some clearance lights to ground through the mounting screw instead of running an extra wire so there's nothing wrong with that. For the amber clearance lights you can use part # MCL67AB and for the red part # MCL67RB. These both come with a single wire for power and ground the the bracket mount screw and are 4-1/8" long x 1-1/4" tall x 1-3/16" deep.
(click to enlarge)
Product Page this Question was Asked From
Peterson Combination Trailer Tail Light - 7 Function - Incandescent - Square - Driver Side
- Trailer Lights
- Tail Lights
- Brake/Tail/Turn
- License Plate
- Marker
- Square
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 4-3/4L x 4-1/2W Inch
- Red
- Peterson
more information >
Continue Researching
- Search Results: brake magnet
- Search Results: tarp handle
- Search Results: crank handle
- Search Results: trailer brake away switch
- Search Results: mcl~57rb
- Search Results: 16 gauge wiring
- Search Results: light mounting bracket
- Video: Easily Install Your Optronics ThinLine Clearance or Side Marker Light - Enclosed Trailer
- Video: Optronics LED Trailer Clearance or Side Marker Light Spec Review
- Shop: Easy Grease Trailer Hub and Drum Assembly for 7K Axles - 12" - 8 on 6-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Video: All About the Trailer Hub and Drum Assembly
- Video: Checking Out the Easy Grease Trailer Hub and Drum Assembly for 7K Axles
- Shop: Peterson Clearance and Side Marker Trailer Light Kit - Submersible - Incandescent - Red Lens
- Shop: Optronics ThinLine Clearance or Side Marker Light w/ Chrome Bracket - Submersible - 3 Diodes - Red
- Shop: Thinline LED Trailer Clearance or Side Marker Light w/ Bracket - Submersible - 3 Diodes - Red Lens
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Shop: Black Molded Fender Bracket for MC65ARB and MCL65ARB Trailer Fender Clearance Lights
- Q&A: Recommended Replacement Red Clearance Light With 3" Mounting Hole Spacing
- Q&A: LED Marker/ Clearnace Lights for Cargo Trailer
- Q&A: Replacement Side Marker Light for 2015 Dynamax Dynaquest RV
- Q&A: Availability of Single Wire Plug for Optronics Clearance Light MCL67ARB
- Q&A: Replacement Axle For a Stealth 7.5X12 Cargo Trailer 3,500-lb 93.5" Hub Face 77.5" Spring Center
- Q&A: Will The Peterson M540 Light Kit Fit A Bracket With 2-1/4" of Head Room?
- Q&A: Does a Trailer Junction Box Have to be Used when Switching from 4-Way to 7-Way Trailer Connector
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)