Can Internal Parts Be Replaced for 45 Amp Progressive Dynamics Replacement Section  

I went ahead and looked up the instructions for the Progressive Dynamics 9100 Inteli-Power Lithium Converter #PD4645V and was able to find some more info for you. For the install instructions, you'll need to: 1. Secure converter firmly to…

It looks like there actually isn't a direct replacement for your Magnetek series 6300A Model 6325 so you'd have to upgrade the entire system. I recommend checking out the Progressive Dynamics 4100 Series RV Converter w/ Charge Wizard and…

Yes, the converter section of your #PD4045KA can be replaced with the #PD4045CSV. This is a direct replacement that will install exactly the same as the old one. This also includes a lithium switch so that you can easily change the charging profile…

You will be able to upgrade your #PD4045KA to use lithium batteries, and in order to do this you'll need to replace the converter (there isn't just an added part aside from the converter that will allow you to do this). So what you need for…

The replacement converter you'd need for your Parallax 7345A is the part #PD4645V. This has all of the same slots for fuses and breakers that you have now so it would work well.

Hey Kim, thanks for reaching out! The Replacement Converter Section #PD4045CSV is the correct fit for your Progressive Dynamics 4000 Series Mini RV Converter w/ Charge Wizard and AC/DC Distribution Panel #PD4045KA. This has a switch on it that allows…

For a new converter, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers part #PD4635V will be a direct upgrade replacement for the Magnetek Converter Series 6300 Model 6332 that you have now.

Hey David, thanks for reaching out! The Replacement Converter Section for Progressive Dynamics Inteli-Power 4000 Series 45 Amp Power Center #PD4045CSV has an output of 14.6V.

The Replacement Converter Section for Progressive Dynamics 4000 Series RV Power Control Center part #PD4045CSV has a lithium mode that when stitched on will provide a constant charge of 14.6 volts. It does not reduce the charge so you'd need to…

Yes, the converter section of the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA states that it is compatible with lithium batteries. Therefore you can charge your Battleborn lithium batteries with it until you get…

You don't have to remove the jumper with the Replacement Converter #PD4045CSV. Using lithium batteries just switch to the LI and you're set.

The #PD4045KA is a single stage charger of 14.6 VDC and does not allow for adjustment. If you want a 2-stage lithium charge, you need to go with the stand-alone deck mount style #PD9145ALV and remove the existing Printed Circuit Board in your…