Does Installing New Trailer Brake Assemblies Require New Drums At Same Time
Updated 10/23/2023 | Published 10/22/2023
Products Featured in This Question
Question:
When replacing brake assemblies, specifically AKEBRK-8L and # AKEBRK-8R, do I need new drums? Or can I have the current drums cut at a brake shop? Or do I just reuse the existing drums as long as they still meet the specs if I measure them with a digital caliper?
asked by: Bill
Expert Reply:
When installing brake assemblies like the # AKEBRK-8L and # AKEBRK-8R it is not required that you also replace the drums at the same time. As long as they are in good shape still and the thickness is good like you mentioned measuring with your caliper you're totally fine.
Product Page this Question was Asked From
Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand - 8,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 8000 lbs
- Brake Assembly
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- etrailer
more information >
Continue Researching
- Video: The Low-Down on the Trailer Hub and Drum Assembly
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Shop: Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement Weld on Trailer Jack for a Phoenix Boat
- Q&A: Replacement Axle For a Stealth 7.5X12 Cargo Trailer 3,500-lb 93.5" Hub Face 77.5" Spring Center
- Q&A: Needing Replacement Brake Drums With 5/8 Inch Wheel Studs on 8,000 Lbs Axles
- Q&A: Looking For Hub/Drum Assembly To Replace Dexter 8-285-8UC3-A
- Q&A: Replacement Hub And Drum Assembly For An 8 Lug Hub With 9/16" Studs
- Q&A: Looking for Horse Trailer Door Latch Replacement
- Q&A: Replacement Grease Seals and Brake Magnets for a Dexter Electric Trailer Brake Assembly
- Article: Trailer Maintenance Schedule
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Testing Trailer Brake Magnets for Proper Function