Trailer Wiring for 2023 Chevy Blazer without Factory Tow Package

Question

Question:

need part number for trailer wiring harness without factory tow package. 2023 chevy blazer rs. thx

asked by: Robert A

0

Expert Reply:

For your 2023 Chevy Blazer if you need a 4-way trailer wiring harness you would need the part # C56325 or if you need a 7-way you would want the part # C56326.

expert reply by: Jameson C

0

Answer 1

The best class III hitch for your 2023 Chevy Blazer is going to be the etrailer Trailer Hitch Receiver item #e36YR. This hitch is custom fit and bolts directly to your Blazer with included hardware. I really like the etrailer item #e36YR hitch…

view full answer...

Answer 2

First you will need the etrailer Trailer Hitch Receiver #e36YR for your 2022 Chevrolet Blazer. This receiver will fit all trim levels with the exception being the premier. It is rated for up to 750lbs of tongue weight and a trailer weight up to…

view full answer...

Answer 3

The easiest hitch to install on your 2024 Chevy Blazer is the etrailer Class 3 Hitch #e36YR. All of the other hitches we offer for the 2024 Blazer will require full removal of the rear bumper, while the #e36YR will not. This will make for a much…

view full answer...

Answer 4

Hey Dee, thanks for reaching out! The Curt Trailer Hitch Receiver with Standard Drawbar #C113753 is for a 2014 - 2016 Scion tC. Since you have a 2020 Chevy Blazer we need a different hitch receiver, and for that I recommend the Class III etrailer…

view full answer...

Answer 5

Yes, you can absolutely pull a 1500 lb trailer with a 2021 Chevy Blazer. Looking at the online owners manual for the Blazer it looks like there is some variance in towing capacity across different models. For example, Blazer 3LT and Premier trims are…

view full answer...

Answer 6

The only difference between the Curt and etrailer trailer hitches that fit your 2023 Chevy Blazer is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that…

view full answer...

Answer 7

The factory connection on your 2022 Buick Envision is located behind the rear bumper cover. You will need to locate the wiring that comes out of the center of the body and follow the wiring toward the drivers side to the connector with the dummy…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Trailer Wiring for 2023 Chevy Blazer without Factory Tow Package

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching