Availability of Rubber End Caps for Mount-n-Lock Heavy-Haul'r Replacement RV Bumper
Published 10/04/2023
Products Featured in This Question
Question:
Do you also carry the rubber endcap that will fit this bumper. From what I read, the little screws associated with the metal endcap fitting wont allow a CAMPCO Rhino hose to fit in the inside and you need to file it down?
asked by: Mark M
Expert Reply:
The review we have that references this was for the # MNT43VR which is the 4" bumper. Standard endcaps like the # CAM40303 or whatever is on your current bumper would likely fit on the end. The customer in the review reused their old caps from the previous bumper instead of the metal plates.
If you're wanting the # MNT63VR which measures 5-5/16" there is no option for alternate endcaps for the bumper. You may be able to get the hose in there since there is additional space compared to the 4" bumper. If you can get it to bend slightly within the space as you feed it in that might do it, but there is no guarantee it will fit.
Filing it down could work as long as you don't take it too far to where the plates aren't secure. Alternatively, you could drill a new hole to the left or right of the original hole and move the screw to the corner where there is more space that won't interfere with the end of the hose.
Product Page this Question was Asked From
Mount-n-Lock Heavy-Haul'r Standard Duty Replacement RV Bumper - 5.3" - 660 lbs - Black
- Accessories and Parts
- RV Cargo Carrier
- RV Bumpers
- Bumper Parts
- Mount-n-Lock
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Where Should I Install the Brackets for Mount-n-Lock RV Bumper on My 2015 Gulf Stream Vista Cruiser?
- Video: Mount-n-Lock Heavy-Haulr Replacement RV Bumper Installation - 2020 Dutchmen Coleman Lantern Travel T
- Video: Setting up the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper on a 2004 Fleetwood Tioga Motorhome
- Video: Mount-n-Lock Heavy-Haul'r Replacement RV Bumper Review
- Video: Hands-On with the Mount-n-Lock SafetyStruts Standard RV Bumper Support Brackets
- Video: Mount-n-Lock SafetyStruts Universal RV Bumper Support Brackets Review
- Shop: Mount-n-Lock Heavy-Haul'r Standard Duty Replacement RV Bumper - 4.0" - 550 lbs - Black
- Shop: Mount-n-Lock Heavy-Haul'r Standard Duty Replacement RV Bumper - 4" - 500 lbs - Brushed
- Shop: Mount-n-Lock Heavy-Haul'r Standard Duty Replacement RV Bumper - 4.0" - 500 lbs - Mill
- Shop: AddaBumper Extension Plates for Mount-n-Lock Heavy Haul'r RV Bumpers - 10 Hole - Qty 2
- Shop: Mount-n-Lock SafetyStruts Universal Bumper Brackets - 4" to 4-1/2" - Qty 2
- Shop: Mount-n-Lock Heavy-Haul'r Standard Duty Replacement RV Bumper - 6.0" - 660 lbs - Black
- Q&A: Replacement Bumper Recommendation for a 1998 Grumman Olson Truck
- Q&A: Can Mount n Lock SafetyStruts Fit 2021 Winnebago Micro Minnie FBS Comfort Explorer
- Q&A: Are Additional Parts Needed to Install the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper
- Q&A: Recommendation For Increasing Strength of Rear Bumper Attached to Spacers Off Of Trailer Frame
- Q&A: Ways To Add a Bike Rack Behind an RV Without a Factory Installed Rear Bumper
- Shop: Mount-n-Lock Heavy-Haul'r Heavy Duty Replacement RV Bumper - 4" - 500 lbs - Mil Finish
- Video: Detailed Breakdown of the Valterra RV Sewer Hose Storage Hatch w/ Lock
- Q&A: Replacement Motor for a 125340 Motor Model Number 1a065012-02-01
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Article: Flat Towing Package for 2013-2015 Smart Fortwo
- Article: How to Carry Bikes While Towing a Travel Trailer
- Article: What is an RV-Approved Bike Rack? (And Do You REALLY Need One?)
- Article: How to Choose a Hitch-Mounted Bike Rack
- Article: How (and Where) to Connect an RV Propane Grill
on Accessories and Parts
