Replacement Bumper Recommendation for a 1998 Grumman Olson Truck  

Hello Tom, When installing the Mount-n-Lock Heavy-Haul'r Standard Duty Replacement RV Bumper - 4.0" - 500 lbs - Mill #MNT78VR it doesn't really matter where they are installed whether it's high, medium, or low just as long as all 4…

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which you…

The Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT78VR comes with mounting brackets but you might need the Extension Plates #MO24VR if your frame is shorter than your RV body. All of the hardware parts needed to install the bumper are…

The review we have that references this was for the #MNT43VR which is the 4" bumper. Standard endcaps like the #CAM40303 or whatever is on your current bumper would likely fit on the end. The customer in the review reused their old caps from the…

With your RV not having a rear bumper you will have a couple options and I recommend collaborating with the trailer manufacturer to determine which is going to work best. First and the easiest is going to be installing a Adjustable Width Trailer…

Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.

I sure can Tim. The 24x84 etrailer Cargo Carrier for RV Bumper item #e96ZR has three mounting brackets spaced at 14-1/2", 42" center, and 69-1/2". Between the individual slats on the bottom of the carrier is 3-1/2". The carrier…

Hey Bryce, thanks for reaching out, and good question. The Mount-n-Lock Heavy-Haul’r Heavy Duty 4-inch #MNT43VR is basically the same 4" x 4" bumper as the standard 4.0, but with a stronger mounting setup. You’re not getting a bigger or…

Hi Jerry; are you referring to the Furrion Built-In RV Convection Microwave and Air Fryer #FR82TD? This will fit in your existing space and work as a replacement. The cutout requirement is 14-5/8" tall x 21-7/16" wide x 16-1/8" deep.…

Hey Randy, congrats on the new Bronco. You're definitely going to need to jump up to a heavy rated tow bar. Like you said the Roadmaster Falcon 2 item #RM-520 tops out at 6,000 lbs and your Bronco's already over that sitting there empty. I…

We're glad you're happy with your B&W Companion 5th wheel hitch. You made a great choice! B&W recommends a 10 inch lube plate. I'd go with #RP83002 which would prevent the skid plate of your hitch from getting all scratched up,…

The extensions you have on your 2018 Keystone Hideout 308BHDS do appear to be enough to mount the Mount-n-Lock Heavy-Haul'r RV Bumper Replacement Kit #MO94VR without needing the Extension Plates #MO24VR. I would recommend having a gusset placed…