Do I Have to Remove the Bumper Cover When Installing a Hitch on a 2023 Ford Edge?

Updated 09/17/2023 | Published 09/16/2023

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(80)

$229.94

Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K

(781)

$76.36

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(29)

$80.11

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(103)

$79.07

etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"

(261)

$191.18

Question:

Hello.... if I install this hitch, does the rear bumper cover have to be removed?

asked by: Robert W

Expert Reply:

No, it does not. The Curt Hitch item # C78KR does not require you to remove your rear bumper cover when installing it on a 2023 Ford Edge. It bolts to the bottom of the frame and the crosstube is concealed behind the bumper cover.

I have an alternate suggestion for a hitch. Instead of the Curt item # C78KR, I recommend the etrailer Hitch item # e36RR. These hitches are identical with the exception of cost and the paint finish. The item # e36RR is our house brand hitch but it is made by Curt. I prefer the flat matte finish of the etrailer hitch because it blends in better beneath your Edge's trim then the glossy finish of the Curt item # C78KR. Saving money is also a nice perk.

I have linked installation videos below for both hitches along with the installation instructions so you can see how to get them set up.

If you plan on towing you will also need a wiring harness. There are two options for your vehicle depending on what model you have and both are custom fit. I have listed them below:

Titanium - Curt T-Connector Vehicle Wiring Harness item # C73FR

SEL or SE - Curt T-Connector Vehicle Wiring Harness item # C89FR

To round out your towing setup, I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.