Replacement Grease Seals For A 2013 Little Guy 5 Wide Trailer
Published 09/15/2023 >
Products Featured in This Question
Question:
I am looking for replacement grease seals for my 2013 little guy 5 wide tear trailer, do you carry such an item?
asked by: Kevin C
Expert Reply:
I can certainly point you in the right direction. Unfortunately we do not have literature that will tell us the seal size based off a year make and model of trailer. There are not a lot of specs listed online for these trailers. I was able to find that a 2013 Little Guy 5 Wide trailer has a single axle, and a gross weight of around 900 lbs. So we are likely dealing with a light duty axle rated for 2,000 lbs or less. Without knowing the specific weight rating of your axle we cannot say for sure what seal size you will need. A very common seal on light duty axles is a # 34823 which is a 1.249" Inner diameter and 1.983" outer diameter. If you are able to pull one of your seals and measure with a caliper, that will be your best bet.
Product Page this Question was Asked From
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.40 Inch I.D.
- 1.98 Inch O.D.
- Redline
more information >
Continue Researching
- Q&A: Replacement For NOK AB1990E Grease Seal
- Q&A: Bearings, Races, and Grease Seal Recommendation for a 1995 Coleman Stoney Pop Up
- Q&A: Replacement Bearing Kit for a 2022 Grand Design Transcend Xplor 265BH
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Q&A: Replacement Shroud For Coleman Mach AC Unit Number 8333-876
- Q&A: Replacement Hub, Bearing, and Grease Seal Kit for a UFP H-1062-3 Axle
- Q&A: Replacement Hub for UFP Hub H-1062-3
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Accurately Measure Trailer Leaf Springs

