How Long Does EcoHitch for 2014 Honda Fit Take to Install

Question

Question:

Who can you recommend to install the trailer hitch on my 2014 Honda Fit and how much do you estimate that installation will cost? Thanks.

asked by: Edward P

0

Expert Reply:

I attached a link to a page that shows where you can find a local installer to you for the EcoHitch part # 306-X7286. The hitch would probably take two hours to install so you'd be looking at two shop hours at the rate of the installers.

expert reply by: Jameson C

0

Answer 1

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7286 is an excellent option for a 2013 Honda Fit, it's the only one with a 2" receiver tube opening in fact. In regards to trimming, this will be very minor. I have attached a photo that…

view full answer...

Answer 2

Since you have a 2009 Honda Fit Sport you will not be able to use a trunk mount bike carrier because on the Sport models trunk mount carriers cannot be safely mounted to the vehicle. The options for carrying bikes are either going to be a roof mount…

view full answer...

Answer 3

The Kuat NV 2.0 2-Bike Platform Rack #NV12G will absolutely work on your 2009 Honda Fit Sport. The only thing you need is a trailer hitch if you do not have one and the EcoHitch Trailer Hitch #306-X7286 is the best option because you aren't going…

view full answer...

Answer 4

I checked with Torklift and their website does say item #306-X7286 has a 300 lbs tongue weight capacity. However, everything I can see online shows the 2012 Fit having a maximum 200 lbs tongue weight capacity. This is common amongst smaller cars. The…

view full answer...

Answer 5

The closest waterproof cargo bag option we have to fit the interior dimensions of the 51-3/4" long x 17-1/4" wide Flint Hill Goods Hitch Cargo Carrier #FHG87ZR would be the Rightline Gear 4x4 Duffel Bag #RL100J87-B. The dimensions of this…

view full answer...

Answer 6

Hey Todd, I think I have a better solution for you with the etrailer cargo carrier part #e98874 which has 2-1/2 inches of rise built into the shank of the carrier. There really isn't a great rise adapter that should be used with a cargo carrier…

view full answer...

Answer 7

For your Flint Hill Goods cargo carrier #FHG87ZR an anti-rattle hitch pin like part #SHP2061 will take the movement out of the carrier for you. Check out the attached video of this device that I have attached for you.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

How Long Does EcoHitch for 2014 Honda Fit Take to Install

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching