Replacement Hubs For A Short Spindle On A 2006 EZ Loader Trailer
Updated 09/11/2023 | Published 09/09/2023
Products Featured in This Question
Question:
I have an ez loader, single axle, leaf suspension trailer from 2006, model ezl 90b 15-16 2100. I need full hub replacement kit, but the spindle on the axle is only 2 5/8inch and most kits with the proper bearings seem to be too big the outside bearing ends up on the threads instead of the spindle. Its 5 x 4.5inch lugs and each hub takes two L44649 bearings. Pls help.
asked by: Nic
Expert Reply:
All of the hubs we carry for a # L44649 straight spindle have a standard "depth". We do not offer anything for a short spindle. The older short hubs that your trailers spindles use are not made any longer so I do not have a hub only option for you.
Your best will be do weld on new spindles and get new hubs. You can use a spindle like the # TRU44FR together with the hubs # AKIHUB-545-2-G-EZ-2K. You will need to make sure the cross tube connecting the two spindles has an inner diameter of 1-1/4". It is recommended to have spindles installed by a professional welder/axle shop.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L44649 / L44649
- Standard Grade
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: ez loader fenders
- Shop: Fulton Single Axle Trailer Fender with Top and Side Steps - Silver Plastic - 12" Wheels - Qty 1
- Shop: Fulton Single Axle Trailer Fender with Top and Side Steps - White Plastic - 12" Wheels - Qty 1
- Q&A: How To Find Correct Replacement Axle for EZ Loader Trailer
- Article: 2005-Current Volkswagen Touareg, Audi, or Porsche Cayenne
- Shop: Brake Controller
- Search Results: griots garage
- Search Results: tools
- Search Results: d washer
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Shop: Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Shop: Pollak 7 Pole to 4 Way Connector Adapter
- Q&A: Recommended Trailer Hubs for 2,200 Pound Axle with L44649 Bearings and 5 on 4-1/2 Bolt Pattern
- Q&A: What Spindle Does Trailer Hub # AKIHUB-545-2-LF-2K Fit
- Q&A: Does Trailer Axle # T20BTR-6048 Fit AKIHUB-545-2-LF-2K Hubs
- Q&A: How to Determine Correct Replacement Hub for Coleman Pop-Up Camper
- Q&A: Recommended Replacements for Dexter 8-257 Trailer Hubs
- Q&A: Can E-Z Lube Hub Be Used on Non-E-Z Lube 2K Standard Axle with BTR Spindle