Trailer Lift Solution for Trailer with Triangle Shaped Hangers

Updated 09/11/2023 | Published 09/08/2023

Products Featured in This Question

Correct Track Trailer Alignment and Lift Kit - Tandem Axle

(51)

$502.06

Dexter Trailer Springs Over-Under Conversion Kit

(779)

$72.79

Dexter Trailer Springs Over-Under Conversion Kit

(779)

$88.64

Question:

The spring hangers on my trailer are not rectangular, rather they are more or less triangular. Is there a way to adapt this kit to fit hangers like I have? Ive attached a picture of one of my hangers. Front center and rear hangers are all shaped the same and are of the same size.

asked by: Mike S

Expert Reply:

We may have a lift solution for you but since your hangers are triangle shaped the Correct Track lift kit part # RR23QX won't work as it requires standard hangers that are square.

So if your springs are below your axles you can move them to be above to gain height. To pick out correct kit for that would be based on your current axle diameter. The part # K71-384-00 is for 2-3/8 inch diameter axles and part # K71-385-00 is for 3 inch diameter axles.

expert reply by: Jameson C