Will The Inno Tire Hold Bike Rack Carry an E-Bike With 4" Wide Tires?

Question

Question:

Hello I have an e-bike with 4" fat tires. Will this rack accommodate it? Thank you

asked by: Dewitt H

0

Expert Reply:

The Kuat Piston Pro Bike Rack # KU66ZR is the closest in design we have to the Inno # INH120 that is capable of holding a bike with 4" wide tires. The Inno can only hold a tire up to 3" wide while the Kuat is rated for tires up to 5" wide and can support 2 bikes up to 60lbs each. Kuat also offer a Loading Ramp # KU63VR making it much easier to load your e-bike since you will be able to walk it up the ramp.

We also have the Kuat for a 2" Receiver # KU76ZR if you wish to not have an adapter and have the larger opening.

expert reply by: Bud M

0

Answer 1

First let's get a hitch that will fit with your Borla exhaust but also have good ground clearance. The Curt Hitch Reciever Part #C13236 will give you 9-1/2" of ground clearance. Now, let's find a rack with the most ground clearance. The…

view full answer...

Answer 2

In order to install a platform-style bike rack you will need to install a trailer hitch receiver if you do not already have one. I recommend the Etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" #e98841 as this…

view full answer...

Answer 3

We do indeed carry the Inno Tire Hold bike rack, #INH110 for a 1-bike, #INH120 for a 2-bike, #INH142 for a 4-bike version. The racks aren't discontinued, and we can get many spare parts from Inno. This particular rack isn't capable of being…

view full answer...

Answer 4

I checked with Kuat and the Piston Pro Bike Rack item #KU76ZR or the item #KU98VR do not work with class C motorhomes only class B with a lower 42 lbs capacity. The reason for this is that the bike rack is not designed to withstand the additional…

view full answer...

Answer 5

Hi Amy! The RockyMounts GuideRail Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount #RKY47ZR can be used with some bikes with fenders, but it is going to depend on said fenders. What kind of bikes will you be carrying? Some do have short…

view full answer...

Answer 6

Thanks so much for your purchase of the Inno Tire Hold 2 Bike Platform Rack #INH120. And that is a good question about how the rack is secured to your hitch, as it doesn't have a traditional hitch pin that goes all the way through, so I'll do…

view full answer...

Answer 7

Hi Mike; I don't see any information out there on that 1-1/4" hitch to indicate if it is a Class I or Class II. The issue with Class I hitches can be the depth of the receiver. Sometimes they're blocked off at the back so you need…

view full answer...

Answer 8

Yes, they will Jeff. The etrailer Hitch item #e77ZV fits both the 2025 and 2026 Toyota Camrys. This is a class I hitch with a 1-1/4" receiver that has a 2,000 lbs towing capacity and a maximum tongue weight of 200 lbs. If you're needing a…

view full answer...

Answer 9

Hey Stuart, while the CVT Timber Creek Annex for Car Camping #RG35ZV was designed to be used at the rear of a vehicle with a hatch it's flexible enough in how it installs you could make it work on a camper shell pretty easily if that's what…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Judging by your recent search, I believe you are referring to the Inno Tire Hold 2 #INH120. One of the common issues we get about the metal pin/spring is that neighbors are not lining up the 2 tabs on the pin when inserting it into the hitch…

view full answer...

Will The Inno Tire Hold Bike Rack Carry an E-Bike With 4" Wide Tires?

Products Featured in This Question

Continue Researching