Are the Boards in the Carpeted Bunk Boards Treated

Question

Question:

Is the wood in these bunks nontreated, treated, or marine grade?

asked by: Matthew F

1

Helpful Expert Reply:

I spoke with my contact at CE Smith and the wood in the Carpeted Bunk Boards # CE27820 is a non-treated wood. The carpet though is marine grade carpeting.

expert reply by: Michael H

1

Answer 1

You can use the Galvanized Steel, L-Shaped, Bolt-On Brackets, #PF775-BKT-2, if you determine that they will fit the fenders and your trailer. The fenders we carry do not come with brackets because every trailer is different. I have included a picture…

view full answer...

Answer 2

As long as the Fulton Single Axle Trailer Fenders w Top and Side Steps #F008594-2 dimensions fit with the design of your 2006 Karavan Trailer (see attached) then they will work. Fenders are universal fits so it's something that the end-user needs…

view full answer...

Answer 3

I can certainly understand not wanting to have to connect 2 five-foot carpeted bunk rails like #CE27820 to get the 10 foot bunks you need. We don't offer them in the 10' length because the shipping costs would be more expensive than the bunks…

view full answer...

Answer 4

The CE Smith Carpeted Bunk Boards for Boat Trailers part #CE27820 are made with untreated lumber. If you want treated you can purchase your own boards and wrap them with the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards part #CE11330.

view full answer...

Answer 5

I have attached a chart for you to take a look at that includes the lug nut torque specifications. If your wheel uses 1/2 inch lug nuts or wheel bolts like the 12 Inch Steel Spoke Trailer Wheel #AM20124 referenced in your question, you will torque…

view full answer...

Answer 6

Ideally you want bunk boards that are at least 50% of the length of your boat, and want the to run from the stern and as far forward as you like. Since your boat is 16' Long you will want at least 8' of bunk boards, but I recommend going with…

view full answer...

Answer 7

Hey Tyler. We do not have any center caps that fit a 4.58" diameter pilot hole. You said you measured and got an outside diameter of 116.38 mm. What exactly did you measure? Center caps like the item #LHCS109-SI60C you were looking at are sized…

view full answer...

Answer 8

Based on the picture you submitted the Fulton Marine Jack part #FXP100W0301 that you referenced would be exactly what you'd need and would bolt right up to the mount you have on the trailer frame.

view full answer...

Answer 9

We have a really great option for a trailer for your 10 foot Bass Pro Pond Prowler boat, although the Malone trailer you mentioned has been discontinued by the manufacturer and is no longer available. Instead, which I highly recommend is an option…

view full answer...

Answer 10

The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the shorter will…

view full answer...

Are the Boards in the Carpeted Bunk Boards Treated

Product Page this Question was Asked From

Continue Researching