Adding Brake Flanges To An Aluminum Trailer with 2,200 lb Axles
Updated 08/31/2023 | Published 08/30/2023
Products Featured in This Question
Question:
I have a blaze aluminum trailer with two axles... they are marked REliable 2200lb sn 0054796 no brake hubs,,, I understand you have retrofit brake flanges available... what needs to happen for met to get a brake flange on this trailer so that I can put brakes on it?
asked by: Mike F
Expert Reply:
What you will want to do is purchase the part # 4-34 as this is a brake mounting flange designed for 2.2k axles, provided your axle is a 1-3/4" round tube.
The brake mounting flange needs to be welded on perfectly square and concentric and if it is off by even just a little bit, this can lead to all kinds of problems with trailer ride, stability, tire, and suspension wear. We strongly recommend that brake flanges be welded on by a professional shop that routinely works on trailers and has the equipment required to weld the flange to the spindle.
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 8,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 8000 lbs GTW
- 2-5/16 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 2K Axles - 7" - 5 on 4-1/2 - L44649 - Pre-Greased
- Shop: Brake Controller
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Spindle Nut Kit for EZ Lube Axles
- Shop: Kodiak Disc Brakes - 8" Hub/Rotor - 5 on 4-1/2 - Dacromet - 2,000 lbs - E-Z Lube
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Actual Weight Capacity of Tandem Axle Trailer
- Video: Redarc Tow-Pro Elite Trailer Brake Controller Review
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 2-3/4" Pilot Hole
- Video: All About the Easy Grease Trailer Hub and Drum Assembly for 2K Axles
- Video: Spindle Nut Kit for EZ Lube Axles: The Breakdown
- Search Results: trailer brake controller
- Video: All You Need to Know About the Brake Mounting Flange for 1-3/4" Round Trailer Axles
- Video: Review of the Dexter Electric Trailer Brakes
- Q&A: Parts Needed to Swap a Trailer With Surge Brakes to Electric Brakes
- Q&A: Can a Brake Flange Be Added To a Trailer Axle With Idler Hubs To Add Electric Brakes
- Q&A: Axle Replacement for Dexter SLR P12 #13 Torflex Axle
- Search Results: brake mounting flange
- Search Results: mounting flange
- Search Results: brake plate
- Search Results: axle spindle nut
- Search Results: axle nut
- Search Results: dexter axle conversion
- Q&A: Can a Hayes 10 x 1 5/8" Braking Assembly W/ No Mounting Flange Be Converted to a Standard Flange
- Q&A: A Professional Should Install Trailer Brake Mounting Flange # 4-34
- Q&A: How to Determine if 2,000 lb Electric Trailer Brakes Will Fit