MORryde Rubber Equalizer Fit For 2022 Grand Design Imagine 2500RL

Question

Question:

What would be the correct MORryde Rubber Equalizers for the tandem axle 2022 Imagine 2500 RL. Or Recommended Rubber Equalizer for the trailer

asked by: Bob M

0

Expert Reply:

The correct MORryde rubber equalizer upgrade for your 2022 Grand Design Imagine 2500RL is the following:

- MORryde Shock Absorbing Suspension Equalizers # MR27ZR

This kit is for tandem axle trailers with 35 inch axle spacing, which is what your 2500RL has. To add an upgraded suspension kit with wet bolts and stronger shackle straps you need the MORryde Suspension Upgrade Kit # MR46ZR.

expert reply by: Kyle S

0

Answer 1

Hi Dan; I can definitely help you find these parts for your 2020 Grand Design Imagine 2500RL. I reached out to Dexter and found that the leaf springs that came with your axle measure 26" so you will want to match that when replacing them. Since…

view full answer...

Answer 2

A shock kit like the Lippert #LC281281 that would fit your 4,400 lb axle is going to help prevent leaf springs from braking as it slows down the movement of the suspension up and down which will take a lot of the impact out of it that would normally…

view full answer...

Answer 3

I would be happy to make a recommendation for upgraded axles and suspension components for your 2018 Grand Design Imagine 2670MK, but first I will need a few measurements from your current components. Starting with the axle you will need to measure…

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 6

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 7

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 8

Hello Justin, Welcome to etrailer! I'm glad you found us. It sounds like you're working on a trailer with a 3,500 lb axle, you can check your axle tag to confirm. If that's the case, the replacement grease seal with part number #58846 is…

view full answer...

Answer 9

If what you have now Chad is pretty flat at 26 inches then the best replacement size would be 25-1/4 inches like you mentioned. Since you wanted to increase the capacity you would want the part #e57SR which is for 4k trailer axles.

view full answer...

Answer 10

Hey Lee, welcome back! The etrailer 4-Leaf Double-Eye Spring #e22YR is a good choice for your 3,500 lb Dexter axles as long as the length matches your original springs. These measure 26" from eye to eye when unloaded and have a 28" flat…

view full answer...

Answer 11

I sure can BJ. To add a keyless entry lock to your 2025 Airstream, I recommend the Bauer NE RV Entry Door Lock for Trailers item #BA33UR for a left handed lock or item #BA53UR for a right handed lock. These locks have Bluetooth capability and a PIN…

view full answer...

Answer 12

Hi Jonathan, that’s a great upgrade to look at, especially if you’re trying to smooth things out and take some of the harshness out of the ride. The MORryde CRE3000 part #MR27ZR could absolutely be a good fit for your 2019 Stryker 3513, but the key…

view full answer...