What is Amp Draw of the Motors of the Happijac Electric Camper Jack

Question

Question:

I understand that the system is 12 V but Im wondering what the power wattage is of the motor itself.

asked by: Patrick I

0

Expert Reply:

Each of the motors of the Happijac Electric Truck Camper Jack System # LC736515-ELKIT is protected with a 25 amp fuse. So it can pull right up to 25 amps.

expert reply by: Jameson C

0

Answer 1

Hey Joe, great question. You’re thinking about it the right way. You can technically run the charge line from the 7-pin’s 12V power wire straight to the positive post on your battery, but with lithium you’ll want to do it safely. Your truck’s…

view full answer...

Answer 2

We do have 2 rocker switches that work in the manner you're asking about, although I do wish this was more of a common feature. The Bulldog Winch Rocker Switch #BDW20258 for Blue or #BDW20256 for Red is the switch I'm talking about. The…

view full answer...

Answer 3

I took a look at the online owner's manual for your 2017 Ram 3500. It looks like the fuse related to the 12V pin at the 7-Way should be located at the F30 position inside the power distribution center (in the engine compartment). This will be a…

view full answer...

Answer 4

Hey Bruce, so the Furrion Chill Cube part #FR27TD would work well for you but it doesn't have ability to work with any other thermostats than the ones it was designed to work with. Also worth mentioning this kit doesn't have a wall thermostat…

view full answer...

Answer 5

I reached out to Clearsource and they said their VirusGuard Filter #CS69FR has the filtration effectiveness of a 0.01 micron filter.

view full answer...

Answer 6

Hello Mel, great question! Yes, the Torklift tie downs part #TL66FV will fit your 2006 GMC Sierra 2500HD crew cab with the 8 foot bed, provided your truck does not have running boards or cab length boards that extend under the bed, and you are not…

view full answer...

Answer 7

Hey, Michael! Thanks for reaching out. Yes, we do carry a front mount hitch for your 2025 Ram 2500 diesel. The EcoHitch Hidden Front Mount #EH37FR will fit both diesel and non-diesel models, but it will not fit the Power Wagon models. There’s no…

view full answer...

Answer 8

I recommend using the Swing Out Extension Brackets for HappiJac Truck Camper Jack Systems item #LC182496 and the HappiJac Fixed Extender Bracket for Dual Wheel Chassis Truck Camper Jacks item #HJ54FR. The fixed extenders are only 5" wide apiece.…

view full answer...

Answer 9

The replacement motor kits that you are seeing will not work with the 4800 series jacks. The 4800 series, uses the 182522 motors and we do not carry them. The 4800 series was discontinued, making it more difficult to find replacement parts. With the…

view full answer...

Answer 10

It looks like the HappiJac 4100 series jacks had 34.5" of travel, and there are some parts available to replace things in a pinch, but with newer trucks getting taller it might be wise to upgrade to a whole new set of jacks. I recommend taking a…

view full answer...

Answer 11

Lippert made specific replacement landing gear for your 2011 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652.

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

What is Amp Draw of the Motors of the Happijac Electric Camper Jack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching