Install Instructions For A Reese Universal 5th Wheel Rail Kit On A 2004 GMC 2500HD

Question

Question:

I need instructions on how to mount 5th wheel rails on my 2004 GMC Sierra 2500HD 6.6. I have a universal Reese mounting kit

asked by: Keegan

0

Expert Reply:

I do have some instructions that you will find helpful. We carry the Reese universal kit # RP30035 which should be very similar if not identical to the kit you bought. I have linked the instruction manual, as well as our install video below. We put the kit on a 2002 F-250, but the process will be extremely similar.

expert reply by: Jesse M

0

Answer 1

Hey Joe, great question! I actually talked to one of the B&W reps about this exact thing when they were here a while back. For the B&W Companion 5th Wheel Hitch #BWRVK3300, the best place to start is the middle position (A). That’s the…

view full answer...

Answer 2

The B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs #BWRVK3500 has the polyurethane molded bushings on the pivot arms. This is where noise and squeaking could come into play, so the manufacturer recommends using…

view full answer...

Answer 3

The Reese Universal Base Rails and Installation Kit for 5th Wheel Trailer Hitches - 10 Bolt #RP30035 is a confirmed fit rail kit for your 2013 Chevy Silverado 1500 4x4 with 6-1/2 foot bed. The attached installation details state that you must go to…

view full answer...

Answer 4

I have attached the complete installation instructions for the Reese Universal Base Rails and Installation Kit #RP30035 that is included with the Pro Series Sliding Hitch #PS30129. This is a universal rail kit that is designed to fit most trucks. You…

view full answer...

Answer 5

Hi Keith, It sounds like you’ll need an adapter to connect your PullRite hitch that fits industry standard rails to the OEM puck system in your 2022 Ford F-250 Lariat. The good news is, you can use the Curt adapter part #C88KR for that! It drops…

view full answer...

Answer 6

For your 2019 Ford F-350 with the hitch package, the Ford OEM 18K is basically the same hitch as the Reese Elite Series Pre-Assembled 5th Wheel Trailer Hitch w/ Wiring Harness - Single Jaw - 18,000 lbs #RP30142 which is a great quality hitch. When…

view full answer...

Answer 7

Hey David, great questions! The Under-Bed Rail and Installation Kit #RP67KR comes with both the 30183 and 30924 parts of the hitch system and are the same as the Ford OEM puck system. All you need is this kit and you'll have the 4 pucks and…

view full answer...

Answer 8

Ford continues to use the same factory puck system it has used in previous years on the 2024 Ford F-250. This means the B&W Companion Fixed #BWRVK3300 and Slider #BWRVK3370 will continue to fit in the new truck. We do also have the Gooseneck Kit…

view full answer...

Answer 9

Though the 20k B&W Companion #BWRVK3300 will snap right into the pucks in the bed of your 2022 Ford F-350 Super Duty, it will indeed limit you a little. Since your new truck has such a high towing capacity, I do recommend going with the 25k…

view full answer...

Answer 10

The B&W #BWRVB3405 is not compatible with Ford's OEM puck system, which has a standard round gooseneck hitch. You would need to swap the base to part #BWRVB3370 in order to fit the hitch inside the pucks instead.

view full answer...

Answer 11

The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…

view full answer...

Answer 12

Hey Marcus, there isn't a spring kit available to help tilt the B and W Companion Flat Bed 5th Wheel Hitch part #BWRVK3050 head back. Generally though if you are lined up decently the angle of the front of the hitch head will allow it to line up…

view full answer...

Install Instructions For A Reese Universal 5th Wheel Rail Kit On A 2004 GMC 2500HD

Featured Help Information

Miscellaneous Media

Continue Researching