How to Pick Out Replacement Slide Out Cylinder for Keystone RV

Question

Question:

Replacement slide out cylinder for 2004 Keystone Everest 361P Triple Slide. Need the cylinder for the dining room area as well as the living room area. These seem to be the same.

asked by: Jackie B

0

Expert Reply:

In order to determine the correct Lippert Replacement Hydraulic Cylinder like part # LC339031 you need to measure the distance between your hydraulic fitting ports and note the color of the cylinder. The above Lippert Replacement Hydraulic Cylinder is designed to replace a black cylinder with hydraulic fitting ports spaced about 25-1/2" apart. If you have a different color or spacing then let me know what that is but I cannot confirm based solely on the year, make, and model of the trailer unfortunately.

I attached a link to a page that has all of the replacement cylinders we offer.

expert reply by: Jameson C

0

Answer 1

To find the correct replacement Hydraulic Cylinder for the slide out of the 2017 Forest River XLR Thunderbolt you'll need to measure the distance from the center of the port to the center of the other port. Since you measured 32" I'm…

view full answer...

Answer 2

There is no way for me to know if Item #LC342328 is compatible. In order to get the correct hydraulic cylinder for your 2005 Gulf Stream Sun Voyager you would need to measure from the center of one port to the center of the other port on your current…

view full answer...

Answer 3

The best match we have for your hydraulic bed cradle slide-out system is the Lippert Replacement Hydraulic Cylinder for RV Slide-Out part #LC339031 which has an extended length of 63" and a retracted length of 39" which you can see from the…

view full answer...

Answer 4

I spoke with a Lippert technician and he said you'll need to do a hydraulic cylinder test to ensure you're not losing pressure. You may have a crack in one of the valves in the manifold causing this. In the attached pictures you'll see…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

How to Pick Out Replacement Slide Out Cylinder for Keystone RV

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching