Is There Specific Distance Between E-Track For Multiple Vehicles

Question

Question:

How far apart should you mount etrack to best fit fit a variety of cars?

asked by: Neil

0

Expert Reply:

There just isn't a specific distance I can offer for how far apart you should mount the etrailer Horizontal E-Track # e62VR for multiple vehicles. There are way too many variables to give any type of concrete answer for that so you'll have to know the width of the track on each vehicle and mount them a distance apart that will allow you to support each vehicle.

To mount the # e62VR you will also need the E-Track Backing Plates with Hardware # e76YR.

expert reply by: Kyle S

0

Answer 1

Hey Randy, We offer the following backing plate kits for different lengths of e-track: Single #e89RR 2-pk #e96RR 3-pk #e46RR 4-pk #e66RR 16-pk #e76YR

view full answer...

Answer 2

Not only can it be done it is actually much easier than you might think John. First for the battery you want to select a deep cycle battery like the #BRW34FR. This will need to be stored in a Box #DW03009 to protect it from the elements. You can…

view full answer...

Answer 3

Since the slot dimensions and capacity of different brands of E-Track are identical, really the only differences are the finish and the lengths the tracks are sold in. If you're using the E-Track in an area where aesthetics are important, you can…

view full answer...

Answer 4

To install the etrailer Horizontal E-Track #e42VR to the floor of your trailer you need the E-Track Backing Plates w Hardware #e76YR which can be used to install the tracks on flooring up to 2" thick. If your trailer floor is thicker than that…

view full answer...

Answer 5

Powder coating and galvanization are both about the same in terms of rust resistance. If you like the black of the part #e42VR it would work just as well as a galvanized version #e62VR.

view full answer...

Answer 6

The capacity is 2,000 lbs per track for the etrailer Horizontal E-Track - Black Powder Coated Steel - 2,000 lbs - 94" Long #e42VR. The weight capacity is per track, so using two of them side-by-side will give you a 4,000 lb capacity. So yes it…

view full answer...

Answer 7

For 53' of E-Track I recommend getting 2 of the etrailer #e42VR for Black Powder Coated or #e62VR for Galvanized. These kits come with 4 sections that are 8' long and while 2 of these kits will give you about 64' of E-Track, it's much…

view full answer...

Answer 8

We don't have a floor length backing plate for the e-tracks. To do a flush mounted setup you could put a sub-floor in the trailer attach the e-track to that and then install the floor between the e-tracks to give it a flush type setup. With that…

view full answer...

Answer 9

The best way to secure a vehicle to trailer is with a wheel net. This takes the guess work out of finding tie-down points on the vehicle and it's the most secure method. The easiest option would be to install e-tracks like the etrailer Horizontal…

view full answer...

Answer 10

If you're looking for wall storage, then the CargoSmart X-Track Trailer Shelf Bundle - Matte Black - Steel - 667 lbs - 5' Long #3481788-T would be the correct solution and it will give you the ability to hang some hooks; if you can locate the…

view full answer...

Answer 11

Yes, there's even an e-track wheel chock setup with the Erickson E-Track Tie Down Kit part #EM58523-09162-4 that you can use to secure a vehicle to E-track. You'd need two sets of these for each car.

view full answer...

Answer 12

You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with Hardware #e76YR. The…

view full answer...

Is There Specific Distance Between E-Track For Multiple Vehicles

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching