7-Way and Brake Controller Recommendation for a 1985 Chevrolet Silverado K10

Updated 07/07/2023 | Published 07/06/2023

Products Featured in This Question

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3448)

$124.27

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(62)

$22.44

Redarc Tow-Pro Elite Brake Controller - Dash Knob - Off-Road Mode - Up to 3 Axles - Proportional

(1693)

$290.00

Question:

Hello What products do I need for a 1985 Chevy Silverado k10 ? Looking for a electric brakes for a 7 pin

asked by: Gabriel S

Expert Reply:

It sounds like you're needing to add a 7-way to your truck so you can use a brake controller. To start, you're going to need add a 4 pole connector. If you already have one you'll just need the Universal Installation Kit for Trailer Brake Controller # ETBC7. If you need to add a 4 pole as well, you can use the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C55312 to add one.

From here you're all set to add a brake controller of your choice. If you're looking for recommendations, the Redarc Tow-Pro Elite Brake Controller # RED44FR is an excellent choice that will work with trailers up to 3 axles, will activate your trailer's brakes in proportion to your brakes, and is completely out of the way, leaving only a control knob exposed when installed.

expert reply by: Bryce D