Correct Replacement Mounting Hardware for Westin R5 Nerf Boards On a 2022 Chevrolet Silverado 1500

Question

Question:

Will these brackets fit my 2022 Chevy Silverado 1500 crew cab pickup My brackets are bent. The running board I have is ok. Westin R5 running board. See attached pictures. Thanks

asked by: Kent P

0

Expert Reply:

The Replacement Mounting Hardware Kit for Westin R5 5" Nerf Bars # 28-5122PK you mention are actually not going to work with your 2022 Chevrolet Silverado 1500.

Instead, you're going to want to use the Replacement Mounting Hardware Kit for Westin R5 5" Nerf Bars # 28-5127PK.

expert reply by: Bryce D

0

Westin R5 Nerf Boards
(click to enlarge)

Answer 1

Blake, the Replacement Mounting Hardware Kit for Westin R5 5" Nerf Bars #28-5104PK are actually for Ram trucks.

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Scott. To add a 7-way and 4-way connector to your 2024 GMC Sierra 3500 that can be used at the same time, I recommend the TowSmart ProClass Trailer Connector item #TS49RR. It's going to replace the factory one and mount in the same position…

view full answer...

Answer 6

Hey Les, welcome back. The Lippert Hydraulic Hose item #LC52AX does not include any fittings. This is a 1/4" inner diameter, 1/2" outer diameter orange hydraulic hose rated for high pressure systems up to 3,000 psi. The hose is sold by the…

view full answer...

Answer 7

Hey Mark, we have the RetraxPRO MX part #RT80485 that is a confirmed fit for your 2024 GMC Sierra 3500 long bed. The fit of this is not based on the OEM puck kit as that would not affect anything related to the cover. Are you wanting to cover a fifth…

view full answer...

Answer 8

Hey Gary, thanks for reaching out. Yes, that's actually one of the most common uses for the Victron Orion-Tr Smart Isolated DC-DC Charger #VN56RR when upgrading an RV to lithium batteries. The Orion would be installed inside the trailer, as close…

view full answer...

Answer 9

Hey Joe! Internal sensors typically last longer, are shielded from the elements, and will get a slightly more accurate reading. They also provide protection against theft if that is a concern. The down side is you have to remove the tire to mount…

view full answer...

Answer 10

Hey Andy, thanks for reaching out. I was able to track down a drawing that shows the dimensions you were looking for. It looks like for the Lippert 1621 model #BW73RV the height can be either 191-/2" or 18-1/2". I've attached the…

view full answer...

Answer 11

The differences between the Firestone Ride Rite #F2613 and the Red Label #F2709 for your 2023 GMC Sierra 3500 Crew Cab Long Bed is the air pressure and max weight capacity. The Ride-Rite #F2613 are rated for 5,000lbs and 100 PSI, where the Red Label…

view full answer...

Answer 12

Hey Jerry, GM moved the placement of their puck systems starting with 2020 models so you are correct that the pucks would have the hitch not sit directly over the axle. GM did the math and made sure that this placement wouldn't adversely affect…

view full answer...

Correct Replacement Mounting Hardware for Westin R5 Nerf Boards On a 2022 Chevrolet Silverado 1500

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching