Why Does The 80 Amp Converter Charger Have a Different Plug Than The 60 Amp Converter Charger?  

The difference between the two models that you were researching is that the #PD9160A is designed for use with lead acid batteries and the #PD9160ALV is designed for use with lithium batteries. Choosing the incorrect battery profile can lead to…

For a similar 60 amp converter that can charge a lithium battery you'd want the part #PD9160ALV but the part #PD9260C can only charge lead acid batteries.

The Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger models, #PD9260C and #PD9160A have a rated power output of 810 watts and 60 amps. The #PD9260C uses the Charge Wizard multistage charging system. Using the built-in Charge…

To change the battery mode on the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR you'll need to insert the included CLAW tool into the small opening next to the battery type indicator light. Press and hold that button (using the…

Once you flip the switch to lithium on your Progressive Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger - 35 Amp #PD4135K it basically bypasses the Charge Wizard #PD92201 so you can remove it or leave it connected.

Yes, the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9280A would be an exact replacement for your PD9280 converter. If you weren't just going to replace it and were going to troubleshoot the issue I recommend…

The blank screen on your LCI Ground Control 3.0 could be either a power issue or a control module issue. I recommend first remove the panel and unplug it from the back leaving it unplugged for at least 15 minutes so that it loses all of the residual…

There may be a bunch of different reason why your Lippert Level-Up system has suddenly stopped working. The most common reasons are due to a dead battery, extending your jacks too far, or a blown fuse. The first thing you should check for is the easy…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Phil, the correct 60 amp converter replacement that is Lithium compatible is the Progressive Dynamics part #PD79RR. This charges at the higher voltage required by lithium batteries.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

To replace your WF-9865LIS converter I recommend the Progressive Dynamics 9300 Series RV Converter Charger #PD79RR. This converter is compatible with lead acid, AGM, and LiFePO4 batteries and has a 60 amp converter rating. It installs the same way so…