Recommended 7-Way Connector for a 2020 Jeep Grand Cherokee w/out the Factory Towing Package
Published 05/27/2023
Products Featured in This Question
Question:
I am installing a brake controller on a 2020 Jeep Grand Cherokee without the tow package. Is this needed Universal Installation Kit for Trailer Brake Controller item # ETBC7
asked by: Steve
Expert Reply:
Yes, it is. Since your 2020 Jeep Grand Cherokee does not have the tow package you have to install the Universal Installation Kit for Trailer Brake Controller item # ETBC7. This is in addition to an existing 4-way connector like item # C62VR.
The item # ETBC7 kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it. You will then connect the blue wire to the blue wire on the brake controller, connect the black wire to the positive post on your Jeep's battery, the white wire to a suitable ground, and the yellow wire to your Jeep's reverse circuit.
I have linked an installation video below.
For a brake controller, I recommend the I recommend the Redarc Tow-Pro Liberty Trailer Brake Controller item # RED24FR. This is a proportional brake controller that automatically adjusts your trailer's braking based on the deceleration of your Jeep. The Liberty has a unique design where the main unit is concealed behind your dash and the only part visible is the control knob.
You will need the Universal Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item # RED69FR to complete the installation, since your Jeep does not have the tow package.
Product Page this Question was Asked From
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Wiring and Brake Controller Set up For a 2003 Ford Van E350
- Q&A: Comparing the Universal Installation Kit # ETBC7 and the 7-Way RV Upgrade Kit # ETBC7L
- Q&A: What Wiring do I Need to get My 2022 Toyota Highlander Ready for Redarc Tow-Pro Brake Controller?
- Q&A: Recommended Brake Controller and Wiring Harness for a 2006 Dodge Ram w/a Factory 4-Way