See what our Experts say about this CURT Trailer Hitch Ball Mount

• How Pliable is the Mighty Cord RV Power Cord w/ Pull Handle A10-5025ED in Cold Weather?
  Welcome back Wayne! The Mighty Cord RV Power Cord w/ Pull Handle item # A10-5025ED is going to stiffen up and become less pliable as temperatures get closer to -30°. It's rated to be used in all kinds of weather conditions but works really well in cold weather. The Mighty Cord RV Power Cord item # A10-5025ED is a 25' long cord with a female 50 amp locking blade and a male 50-amp 4-prong straight blade. It's got a really convenient handle on the male end that allows you to get your fingers...
  view full answer...
• Ball Mount that Works with Chevy Multipro Tailgate Folded Down
  Based on how tight of clearance there is between the MultiPro tailgate and the rear hitch of the new Chevy trucks I can tell the Curt ball mount part # C43JR would not work with it. Best option is the B and W Tow and Stow part # BWTS20066BMP which was designed to work with the MultiPro tailgate so it for sure will easy work. I attached a picture that shows the clearance it provides. We don't have any fixed ball mounts at this time that were designed to provide the needed clearance.
  view full answer...
  
• What Is The Weight Towing Capacity For The Curt Trailer Hitch # C15810
  The Curt Trailer Hitch # C15810 is confirmed to fit your 2006 Ford F-250 and has a maximum gross trailer weight up to 20,000 pounds and has a maximum tongue weight up to 2,700 pounds. You're only as strong as your weakest component so even the hitch is rated up to 20,000 pounds double check your vehicle's manual to find the proper towing capacity of your vehicle. The trailer hitch has a 2-1/2 inch by 2-1/2 inch opening. You will also need the Curt Forged Ball Mount # C43JR. To deter you...
  view full answer...
• Can Curt Ball Mount with Mounted Hitch Ball be Used in Rise Position
  Hey Fred, yes you could remove the ball of the Curt ball mount part # C43JR, flip the ball mount over, and then reinstall the ball to use it as a rise ball mount instead. For basically the exact same thing but for a 2 inch hitch you would want the Curt ball mount part # C45332.
  view full answer...
• What 4" Drop Hitch do You Recommend for a 2-1/2" Hitch and a 2-5/16" Ball Coupler?
  Yes! We have the exact 4" drop ball mount you need for your application. For the perfect fit, I recommend the Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitch - 2-5/16" Ball # C43JR. To go along with the mount, if you need a great locking hitch pin to protect the mount from theft, that is the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Flush - 3-5/8" Span # e98881.
  view full answer...
• Diameter of Hitch Ball Hole for Curt Ball Mount # C43JR
  The diameter of the ball hole of the Curt ball mount part # C43JR is 1-1/4 inch. We also have this available without a hitch ball with the part # C45458.
  view full answer...

Do you have a question about this Trailer Hitch Ball Mount?