No Signal Issue Fix for a 2022 Keystone Cougar 5th Wheel Using a Furrion Vision S Camera

Updated 05/09/2023 | Published 05/06/2023

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(736)

$463.80

12V PWM Filter for RV Backup Camera Systems - Hardwire

(238)

$69.90

Question:

We have a 22 Keystone Cougar and purchased the Furrion Vision S camera When we plug it into the adapter that is hook on the cigarette light plug it will pair and we can see the blue light on the camera but when we go out and plug it into the wiring for the rear camera there is no signal on the monitor and no lights on the camera either. We used a tester to make sure there is power and there is in the back wiring Any help greatly appreciated!

asked by: Dale F

Expert Reply:

It sounds like you're just not getting enough power to your Furrion Vision S Wireless RV Backup Camera System w/ Night Vision # FOS43TASF which is causing the no signal issue.

An easy fix for this is to install the 12V PWM Filter for RV Backup Camera Systems - Hardwire # VGR64VR.

This kit is designed to prevent camera dropouts by providing the adequate amount of power required for your camera.

expert reply by: Bryce D