Guide Bolt Dimensions for Kodiak 3,500 lb Disc Brakes
Updated 05/05/2023 | Published 05/02/2023
Question:
what is the length of slider pins on Kodiak k2r35d? Im concerned theyd interfere with the trailer frame. thanks.
asked by: Bil
1
Helpful Expert Reply:
The overall length of the bolts for the caliper on the Kodiak Disc Brake Kit # K2R35D is 3" (see attached).
expert reply by:
Jon G
1
Guide Bolt Dimensions for Kodiak Disc Brakes
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Upgrading Trailer Tires from 13 Inch Tire to a 14 Inch Tire
- Q&A: Kodiak Disc Brakes For 3,500 lb Axles on Travel Trailer
- Q&A: Does Kodiak Disc Brake Kit for 3,500 lb Axle Use Standard 4 Bolt Pattern
- Q&A: Where to Install Single Disc Brake Kit on Tandem Axle Trailer?
- Q&A: Installation of Kodiak Disc Brake Kit on 3,500 lb Axle
- Search Results: kodiak brake kit
- Q&A: Can Kodiak Disc Brake Caliper Replace Reliable CR1000
- Q&A: Recommended Disc Brake Hubs, Lines, and Hydraulic Actuator for a Boat Trailer w/a 3,500 lbs Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Best Boat Trailer Jacks
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub