Does Kodiak Disc Brake Kit for 3,500 lb Axle Use Standard 4 Bolt Pattern
Updated 05/27/2021 | Published 05/26/2021
Question:
hello, My back 4 bolt back plate has a pattern of 2-3/4inch center to center sq. Will this disc brake kit fit ? Also these dimension are missing in the specs and details of this item. Thanks
asked by: Bill C
0
Expert Reply:
Your bolt pattern is a standard 4 bolt pattern which the Kodiak Disc Brake Kit part # K2R35D does work with. We should add that but basically if a brake flange is 4 bolt it's going to be what this was designed for.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Continue Researching
- Search Results: kodiak brake kit
- Q&A: Upgrading Trailer Tires from 13 Inch Tire to a 14 Inch Tire
- Q&A: Guide Bolt Dimensions for Kodiak 3,500 lb Disc Brakes
- Q&A: Kodiak Disc Brakes For 3,500 lb Axles on Travel Trailer
- Q&A: Where to Install Single Disc Brake Kit on Tandem Axle Trailer?
- Q&A: Installation of Kodiak Disc Brake Kit on 3,500 lb Axle
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Q&A: Can Kodiak Disc Brake Caliper Replace Reliable CR1000
- Q&A: Recommended Disc Brake Hubs, Lines, and Hydraulic Actuator for a Boat Trailer w/a 3,500 lbs Axle
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Is It Illegal to Leave My Hitch on My Truck?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Best Boat Trailer Jacks
- Article: Trailer Wiring Diagrams
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub