Availability of a ST225/75R15 Load Range E Tire With Galvanized Mini Mod Trailer Wheel

Question

Question:

ST 225/75R15 6 5 1/2 Galvanized Do you have this rim and tire in load range E?

asked by: Steve G

0

Expert Reply:

We do have the Steel Mini Mod Galvanized Trailer Wheel # AM46ZR which you can pair with the Karrier ST225/75R15 Load Range E Radial Trailer Tire # AM10303. You would need to have these mounted at a local tire shop as we do not offer them as a wheel and tire package or have the ability to mount them at our facility.

expert reply by: Bud M

0

ST 225/75R15 LR E, 6 on 5-1/2 Galvanized
(click to enlarge)

Answer 1

Yes, the DeeMaxx Trailer Wheel Lug Nut #DE65GR is strong enough to be used with an RV that has axles with a higher weight capacity.

view full answer...

Answer 2

It actually matters greatly! Chrome is not all that corrosion resistant. Stainless steel on the other hand is light years ahead of chrome as far as corrosion resistance. Since you are at the Gulf Coast and salt water stainless steel is the way to go.…

view full answer...

Answer 3

Hey Jeremy, For stainless steel lug nuts I'd go with Lionshead's 1/2" -20 #LHLR103 or 9/16"-18 #LHLR110 depending on the diameter of your wheel studs. You could add in a hub cover but it's honestly not necessary and more so just…

view full answer...

Answer 4

Hello Chase. You can indeed use the DeeMaxx Trailer Idler Hub #DE96VR on a Dexter torsion axle. As long as your Axle uses a #42 spindle with a #25580 (1.750" ID) inner bearing and a #15123 (1.250" ID) outer bearing it will work great.

view full answer...

Answer 5

If you are only needing an idler hub we have the DeeMaxx #DE96VR which you will need to combine with the Bearings #25580, #15123, Grease Seal #GS-2125DL and either a standard Grease Cap #F001520 or EZ Lube Cap #DC250L-DCRP. For a hub/drum assembly we…

view full answer...

Answer 6

Typically 1-1/2 to 1-3/4 inch diameter axles have 1,000-1,200 lb capacities. Since your axles are smaller than that I can only assume slightly less than 1,000 lbs. On some trailers there will be a plate or sticker that will list the trailer…

view full answer...

Answer 7

We can definitely narrow it down, but it is difficult to say with 100% certainty what the weight rating is based on those specs. Generally a 6 lug hub will be on axles rated between 5,200 and 6,000 lbs. There are some 3,500 lb axles that use a 6 lug…

view full answer...

Answer 8

EZ Loader trailers have different sizes and configurations which come with different types of bearings so I can not tell you exactly what your bearing sizes are. One of the easiest ways to find your bearing size is to take off one of your hubs and…

view full answer...

Answer 9

It is certainly possible for any axle to wear out enough over time to need replacing. Since the suspension is built into a torsion axle if the suspension part was to wear out pretty much the only solution would be to replace the axle. If the…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Availability of a ST225/75R15 Load Range E Tire With Galvanized Mini Mod Trailer Wheel

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching