Slam Latch Option

Question

Question:

Looking for the part number for the Slam latch on a forest river m silverback 37MBH

asked by: Julian C

1

Helpful Expert Reply:

We don't have any way of knowing what slam latches are on any trailer; if you have a Bauer BP-20, Fastec (FIC) 30205, Global Link 40101-2006, BLL-50101-2006 - or if your cutout is 3-1/4" tall x 4" wide you can use the Bauer Products RV Baggage Door Slam Latch # BA57FR.

Or if you have a 1-1/2" thick Global Link, Fastec (FIC), Bauer, or Lippert Components standard baggage door lock you can use the Global Link RV Baggage Door Slam Latch with Keyed Alike Option # 295-000015.

expert reply by: Kyle S

1

Answer 1

The lock cores on the Global Link RV Baggage Door Slam Latch #295-000015 does use a cam lock. To be keyed alike you do need to replace its lock cylinder along with the lock cylinders in your other Global Link locks with the correct length cylinder…

view full answer...

Answer 2

Hello Robert, For a compartment door lock with a 3-1/2" x 3-1/2" hole, what you need is the Global Link RV Baggage Door Slam Latch #295-000015. Your door needs to be at least 1-1/4" thick as well, and this will require the Global Link…

view full answer...

Answer 3

You can change your cam locks to slam latch locks but it will take modifying your hatch doors. You can use the Global Link RV Baggage Door Slam Latch with Keyed Alike Option - Black - 1-1/2" Thick #295-000015 along with the Global Link Mounting…

view full answer...

Answer 4

You can change your cam locks to slam latch locks but it will take modifying your hatch doors. You can use the Global Link RV Baggage Door Slam Latch with Keyed Alike Option - Black - 1-1/2" Thick #295-000015 along with the Global Link Mounting…

view full answer...

Answer 5

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 6

Hey Jeffrey, the Andersen Ultimate Connection 5th Wheel Trailer Hitch System #AN67VR is only designed to attach to the truck by the gooseneck ball that is in the truck bed. This is more of a universal type fifth wheel hitch solution and would not…

view full answer...

Answer 7

Hello Gregory, thanks for reaching out. We do carry baggage door latches that may work for you, but there is no way to look up your camper to know exactly which latch you need. RV manufacturers just are not that specific with their online literature.…

view full answer...

Answer 8

Hey James, we have compartment latches like you are looking for with the Bauer Products RV Baggage Door Slam Latch part #BA57FR which is designed to fit a cutout of 3-1/4" tall x 4" wide. It's hard to say exactly what you cut out is but…

view full answer...

Answer 9

Hey John! Since you have the same number of teeth the Replacement 24 Tooth Pinion Spur Gear for Power Gear RV Slide Outs #LC86EX will likely work as a replacement. I would measure the outer diameter as well. If it matches the 1.417" measurement…

view full answer...

Answer 10

So it looks like the Lippert Slam Latch for RV Doors #LC54PJ will fit into a 3-3/4" x 3-3/4" cutout hole, and a 1/2" thick door. With your door being a half inch thicker, this slam latch is not going to work. Instead, I recommend going…

view full answer...

Answer 11

Hey Scott, The Global Link Locking Baggage Lock Actuator Set with Mounting Plate #GL34FR requires a cutout hole measuring approximately 3.75" x 3.75" and a door thickness of 0.7" to 1.25" thick. Overall it's 5" wide x…

view full answer...

Answer 12

Hey Joe, yes the parts you mentioned are correct for what you need. The correct control module/brain would be the part #LC53ED and the replacement control panel would be the part #LC175225. Did yours get damaged or did it stop working one day?

view full answer...

Slam Latch Option

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching