Parts Needed To Convert Surge Actuated Disc Brakes To Operate Off Electric Trailer Brake Controller
Updated 04/17/2023 | Published 04/15/2023
Products Featured in This Question
Question:
Good Morning I am looking for some help in replacing my surge actuator LP8500 on a tandem axle trailer for my wake surf boat. I have reviewed your site and see there is not an exact replacement for the LP8500. I am also inquiring about replacing this system with electric breaks. Current system has disk breaks tie down LTD 46304 Engineering. is the part number on the break piston. The axles to brake mounting plate are 5 bolt and the break mounting plate part number is 44478. The rims are 6 lug and again tandem axle. The trailer and boat weight around 7700 LBS. Thank you for your help.
asked by: Jobe S
Expert Reply:
If the disc brakes on your trailer are still in good condition you can install the Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness # HS381-9067. This will allow you to control the trailer brakes using an Brake Controller # 90195 rated for electric over hydraulic brakes. It will also give you much better braking than if you were to install Electric Brakes # AKEBRK-7-SA on both your axles.
In the event you wish to install standard electric brakes I will need for you to disassemble one of your hubs to measure the spindle. This will ensure I find you the correct hub/drums for each of your spindles.
The Demco Channel Tongue Trailer Coupler # DM13689-95 will allow you to drill holes for attaching to a 3" wide trailer tongue. You will not want to try and use the LP8500 surge coupler as components inside the coupler could fail and cause further issues down the road.
Product Page this Question was Asked From
Hydrastar Marine Electric Over Hydraulic Actuator w/ Breakaway and 7-Way RV Harness - 1,600 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Boat Trailer
- Travel Trailer
- Disc Brakes
- Hydrastar
more information >
Continue Researching
- Q&A: Differences Between the HydraStar Hydraulic Actuators for Disc Brakes
- Q&A: Replacement for Swing Away Coupler/Actuator on MasterCraft Boat Trailer
- Q&A: Does Surge Brake Actuator Need To Be Disabled When Installing EOH Brakes?
- Q&A: How To Install The Plug-And-Play Hydrastar Vented Marine Electric Over Hydraulic Actuator
- Q&A: Breakaway Battery Kit Needed for HydraStar Actuator on Triple Axle Trailer
- Q&A: Which Trailer Electric Over Hydraulic Actuator is the Best
- Q&A: How to Convert a Trailer with Surge Brakes to Electric Over Hydraulic Brakes
- Article: Trailer Lighting Requirements
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Best Boat Trailer Jacks
- Article: How to Bleed Your Trailer Surge Brakes