Replacement Roof Vent For MaxxAir MaxxFan 4900K

Question

Question:

Do carry model no. Maxxfan 4900k

asked by: Mike F

0

Expert Reply:

I recommend using the MaxxFan Plus Roof Vent # MA00-04500K he MaxxFan 4900k is no longer in production. This is very similar as it has thermostatic control, remote control and rain sensor.

Adding the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955003 will allow you to still use the vent even in the rain. It will attach with the included clips so no drilling is required. It is smoke like the vent cover to allow light to still come in when closed.

expert reply by: Bud M

0

Answer 1

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Answer 2

Each gate valve is held in place by four bolts that you can just unscrew and then swap the gate valve out with a new one like Valterra's Bladex #T1003VP and bolt back in place. If your gray gate valve ever needs to be replaced you can use part…

view full answer...

Answer 3

Yes, the Camco RV Wastewater Tank Replacement Valve #CAM39513 is threaded. Another option is the Valterra Bladex Waste Valve #T1003VP, which like the Camco is a manual single waste valve with a 3" diameter.

view full answer...

Answer 4

Your MaxxFan Plus Roof Vent #MA00-04500K uses the Remote #MA00A01150K. The Key Wall Control #MA00A03550K is not compatible with your fan.

view full answer...

Answer 5

Yes you are correct the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX is the right replacement and measures 18 1/8" long and 16 1/2" wide, which is the same measurements as your current MaxxFan Plus Roof Vent w/…

view full answer...

Answer 6

Hey Paul, yes we do. You can use the Replacement MaxxFan Plus 4-Speed Roof Vent with White Lid #MA00-04751KSX to replace your current fan and will work with your original controller and garnish.

view full answer...

Answer 7

Hey Ashley, what is the diameter or size of the current vent setup you have? If I can get that from you I will be able to tell what would make sense for a replacement. In RV bathrooms sometimes its the standard 14 inch by 14 inch or sometimes…

view full answer...

Answer 8

Hey Susan, sorry to hear about your microwave. Due to it's age I wasn't able to find it's dimensions to pick out a replacement that would closely match it but I was able to determine it was a 1.0 cubic foot microwave like the High Pointe…

view full answer...

Answer 9

I found the light you are looking for on Google, but we don't carry that style of light. I really wish we could help but we could only offer a somewhat different option like the Bargman 84 Series light part #30-85-002. This measures 14-1/16"…

view full answer...

Answer 10

Hello Alan, thanks for reaching out. The main advantage of using the Curt RVi Towed Battery Charger #RVI74FR instead of running a simple hot lead is that it properly manages and protects the charging circuit between the motorhome and your Gladiator.…

view full answer...

Answer 11

Hey Paul, the LaSalle Bristol XTRM roof membrane like what comes with the part #344270KIT30, is 27 MIL which makes it about 0.68 mm thick. What type of roof material was on it prior?

view full answer...

Answer 12

The composite gearbox, part #75054SP is designed for use with standard, heavy, and super duty landing gears. The replacement gearbox, part #LG-179015 has been used by several customers and they say it is a great fit. This gearbox is made of aluminum…

view full answer...

Replacement Roof Vent For MaxxAir MaxxFan 4900K

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching