Mounting Option for the CE Smith Single Axle Trailer Fender # CE17960ATB
Updated 01/24/2014 | Published 01/23/2014 >
Products Featured in This Question
Question:
Could this fender be mounted like the installation video of Redline Trailer Fenders - J101733AT? Screwing through the lip of the fender.
asked by: Ryu
Expert Reply:
I would not recommend mounting the CE Smith Single Axle Fender, # CE17960ATB, by screwing through the lip. You will have less than 1/2 of an inch from the bottom edge of the lip to the curve. This would not leave enough room for a washer to spread out the force of the bolt on the fender.
Instead, I recommend using trailer fender mounting brackets like part # CE26098G-2. These mounting brackets have 3/8 inch diameter mounting holes, so you will want to choose your mounting hardware accordingly.
Product Page this Question was Asked From
CE Smith Single Axle Trailer Fender - Aluminum Tread Plate - 13" Wheels - Qty 1
- Trailer Fenders
- No Step
- 13 Inch Wheels
- 9 Inch Wide
- 28 Inch Long
- Aluminum
- Bolt-On
- Weld-On
- For Single-Axle Trailers
- Diamond Plate
- CE Smith
more information >
Continue Researching
- Q&A: Will Curt Hitch C99RV Fit A 2026 BMW X3 M50 With The M Sport Package?
- Q&A: How to Remove Trailer Wheel that Doesn't have Lug Nuts or Bolts
- Article: Trailer Tire Sizing
- Q&A: Looking for Galvanized Trailer Fender that is Close to 27.5 inch in Length
- Q&A: Fuse Locations for Trailer Turn Signals on 2015 Ford F-250
- Article: How to Measure a Trailer Axle
- Q&A: Mounting Hole Dimensions of Buyers Products 45 Ton Pintle Hook
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Can Dexter 15K Hydraulic Drum Brake Assembly Be Used on 12K Axle
- Q&A: Replacement for Dexter Grease Seal 010-019-00
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Article: How to Determine Tire/Wheel Diameter
- Article: Best Bike Racks for Electric Bikes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)

