Will the Brophy Recessed D-Ring Tie-Down Work on an Enclosed Trailer with Particle Board Floor

Updated 01/16/2014 | Published 01/15/2014

Products Featured in This Question

Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs

(391)

$24.41

Erickson Easy Ratchet Tie-Down Straps w/ Release Levers - 2" x 10' - 1,333 lbs - Qty 2

(83)

$33.89

Erickson Ratchet Tie-Down Strap w/ Double J-Hooks - 2" x 25' - 1,650 lbs

(141)

$22.94

Question:

Can I use the Brophy RR5k d-rings in a 16 foot enclosed trailer that has 3/4 particleboard floors? It will be used to transport english sports cars. Thanks!

asked by: Steve H

Helpful Expert Reply:

You can use the Brophy Recessed Trailer D-Ring, # RR5K, on your enclosed trailer, however, my main concern would be the ability of the particle board floor to secure or support a heavy load such as a car. Particle board is weaker than wood boards or plywood. The floor would fail well before the d-ring and that would be the case with most tie-down rings that you would install.

It would be best to bolt the d-rings to the trailers frame where possible and add additional reinforcement from the trailers frame.

The Brophy D-Rings have a weight capacity of 5,000 lbs. If you would like a set of straps with a similar weight rating, you can use the Erickson Ratchet Strap, # EM52400 or # EM34410.

expert reply by: John H