No Power To Furrion Vision S Camera

Updated 02/02/2023 | Published 02/01/2023

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(736)

$463.80

Furrion Vision S Wireless RV Backup Camera w/ Night Vision - Rear Mount - Black - Qty 1

(67)

$207.18

Question:

I do not have power to the rear camera, is there a switch ?

asked by: Tim J

Expert Reply:

There is no switch on the Furrion Vision S Wireless RV Backup Camera System item # FOS43TASF. If your monitor is working and you've gone through the resetting and troubleshooting process you will want to take a look at the power cord to the camera. It has a round jack connection at the back of the camera and bare wires that connect to a 12 volt source at the back of the trailer.

These wires are thin and sometimes break so you should make sure there isn't a severed connection. If the wiring checks out you will want to make sure you are getting power to your camera. If you are getting power then your camera has gone out and you will need to replace it with item # FCN48TASF. Your truck will need to be on and your camper hooked up to get power.
.

expert reply by: Jerred H