Recommended Trailer Brake Controller For a 2019 Jeep Wrangler Sahara With Factory Tow Package  

We currently do not have any installation videos for the Redarc Encapsulated Power Diode #RED34FR being used to install the Redarc Tow-Pro Liberty Brake Controller #RED24FR with the Harness #RED69FR and Panel #RED48FR for any vehicles or your 2021…

The best place to find the stoplight circuit on a vehicle like your 2020 Subaru Outback is going to be at the brake pedal switch. You'll need to use a circuit tester like part #PTW2993 to test all of the wires till you find the circuit that…

I would be happy to help! You are correct that on vehicles like your 2016 Kia Sorento you will not want to get the brake light signal directly from the stop light switch. Picking up the signal there will only activate the trailer brakes when you…

The Redarc Encapsulated Power Diode #RED34FR is only needed on vehicles with certain advanced safety systems like the Adaptive Cruise Control, Assisted Emergency Braking and Autonomous Emergency Braking. If your 2016 Toyota Highlander has these…

There sure is! The Redarc Encapsulated Power Diode for Tow-Pro Brake Controllers #RED34FR you were looking at gets wired as shown in the included diagram. One of the red wires goes to the red brake output wire on your trailer brake controller, the…

Yes it will. According to Redarc, Ranger models equipped with the adaptive cruise control can be difficult to obtain a stop lamp signal from. The stop lamp switch will only get input from the driver, not the adaptive cruise. I'm told that instead…

Thanks for the pictures you sent! It looks like you don't have the right plug under your dash which is due to not having the factory tow package on your 2020 Ford Ranger. That's ok, since there's still a solution to adding brake…

Yes, you can use the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR with the Plug-and-Play Wiring Harness #RED93RR on your 2022 Jeep Wrangler Rubicon 4xe with the factory tow package. This controller includes a Universal Mount #331-TPSI-001…

To connect your Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR on your 2019 Jeep Wrangler Unlimited with the factory tow package you only need the Plug-and-Play Wiring Harness #RED93RR. We have never had dash error lights with these installed…

The Blue Ox 4-diode tow bar wiring kit #BX8848 that you have installed in your JL Unlimited will not cause issues with the brake lights on the Jeep since it will be in Tow Mode when you are flat towing it. This will allow the motorhome to control the…

To convert from US to European wiring you will need the Vehicle to Vehicle Taillight Converter, item #118158, which will convert the 2 wire system on a towing vehicle to a 3 wire system on a towed vehicle or trailer. You will run the taillight…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…