How To find The Correct Center Cap For 5.30-12 Trailer Tires

Question

Question:

Need center caps for 5.30x12 trailer tires 2 of them

asked by: Charles L

0

Expert Reply:

To find the correct center caps for your trailer wheels I'll need to know the pilot hole diameter. These is the center hole that the spindle sits through on the wheel. Typically with a 5.30-12 tire you're going to have either a 2.84" or 3.19" pilot hole.

For a 2.84" pilot hole you could use the Americana Trailer Wheel Center Cap - Chrome Plated - 2.80" to 2.84" Pilot # AM90113.

For a 3.19" pilot hole you could use the Trailer Wheel Center Cap, Chrome, 3.19" Pilot Size # 319EZ.

expert reply by: Kevin C

0

Answer 1

The Round Swivel Marine Jack w/ Wheel - Bolt On - Zinc - Sidewind - 10" Travel - 1,000 lbs #MJ-1206B can absolutely be installed on the tongue part of the trailer. The video you are referring to I have attached and it wasn't added to the…

view full answer...

Answer 2

Luckily, when using a J-Style Carrier like the etrailer J-Style Kayak Carrier #e98878 it will cut down the normal width of a flat kayak almost in half. If you cannot lay 3 kayaks flat on your 78 inch bars #Y00411, then you will be able to get a…

view full answer...

Answer 3

I went out into our warehouse and measured the inner depth of this Trailer Wheel Center Cap #319EZ and found that it is 3-1/8 inches to the nearest portion of the cap. Check out the picture I attached to see the measurement.

view full answer...

Answer 4

Hey Robert, our trailer wheel and tire combos like the Strider ST235/80R16 Radial Trailer Tire w/ 16" Revolver Black Mod Wheel #TA27AR are not balanced as generally people don't balance trailer wheels. The weights don't stay on trailer…

view full answer...

Answer 5

Hey Dan, thanks for the pictures and all the information! To replace the tires and wheels on your 5th wheel trailer, I recommend the Goodyear Endurance ST235/85R16 Radial Tire w/ 16" Margay Aluminum Wheel item #LH35VR. This Goodyear Endurance…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Austin, for trailer wheels like what we carry the vast majority of them have a zero offset. Most of the time this is listed in the descriptions but if it's not then it would be safe to assume it's zero. If it's not zero though it will…

view full answer...

Answer 8

We have two options for trailer wheel center caps that fit pilot holes with a diameter of just over 5 inches, which I'll list for you: - 5.12" Pilot Diameter: Americana Trailer Wheel Center Cap - 5.12" - Chrome #AM90083 - 5.15"…

view full answer...

Answer 9

Yes, for a 5-1/8" or 5.12" diameter chrome wheel center cap we have the Americana Trailer Wheel Center Cap part #AM90083 which is actually the only center cap we have in this size at this time. If you have EZ lube axles then you can simply…

view full answer...

Answer 10

Hello Mike, Valterra who is the owner of Mighty Cord is based in California, the Mighty Cord RV Power Cord Adapter Plug - 15 Amp Female to 30 Amp Male - Triangle #A10-3015AVP is made in China. Were you looking made here in the United States?

view full answer...

Answer 11

The Timken Bearing Kits #TMK54ZR and #TMK34ZR both come with the Timken #L44643 bearings, #L44610 race, 204507 seal and cotter pin. The only difference is that the #TMK34ZR comes with a grease cap, while the #TMK54ZR does not. Other than that, they…

view full answer...

How To find The Correct Center Cap For 5.30-12 Trailer Tires

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching