Recommended Suspension Replacement For A Lippert Equa-Flex On A 2017 Keystone Raptor

Updated 11/08/2022 | Published 11/05/2022

Products Featured in This Question

MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase - 8K

(717)

$416.91

6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long

(2083)

$75.74

MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps

(1953)

$125.09

Question:

2017 Keystone Raptor 398TS Trying to replace my suspension. The equalizer, all shackle straps, springs, and any hardware. I was looking at the MORryde CRE3000 but I am not quite sure which one to get, or the hardware that will fit with it. Axle: Capacity- Each one said 7000 lbs Triple Axle Axle spacing- 33 inches from center to center Springs: Length eye to eye- 26 inches Total number of leaves- 6 Thickness of leaves- 1/4 inch Double Eye Spring Equalizer is equa-flex currently Length- 6 1/2 inches Height- 5 3/4 inches Shackle Strap measurement is 2 1/4 inches

asked by: Kyle A

Expert Reply:

For your 2017 Keystone Raptor 398TS, I recommend checking out the:

-MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33" Wheelbase # MR59ZR.

These equalizers are designed to work with triple axle trailers with a 33" wheelbase and have up to an 8K axle capacity, like your Keystone Raptor.

Additionally, these equalizers are made in the USA, have an easy bolt-on installation, and will deliver a smoother ride by reducing the stress on the frame.

For your shackle straps and bolts, you are going to need the MORryde Suspension Upgrade Kit for Tandem Axle Trailers # MR46ZR.

Finally, for your springs I recommend the 6-Leaf Double-Eye Spring for 7,000-lb Trailer Axles # e64SR.

These are 6 leaf double eye leaf springs that measure 24-7/8" from eye to eye, and have a maximum axle capacity of 7,000-lbs.