Replacement for 5-Lug Bolt Pattern, 89" Long Axle with 4" Drop and 74" Spring Centers
Published 10/20/2022
Products Featured in This Question
Question:
springs are 74 apart and the faces of the hubs measure 89. do you have a drop axle that meets these with a 5-lug?
asked by: Pat
0
Expert Reply:
Yes, if sounds like you're looking for the Trailer Axle with Idler Hubs # e72GR or Trailer Axle w/ Electric Brakes # e95SR for your application. These both match the hub-face and spring-center measurements you referenced, they have the 4" drop, and they also use the standard 5 on 4-1/2" bolt pattern you mentioned.
Attached is an installation video of an axle for you to check out!
expert reply by:
Jon G
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 4" Drop - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- Drop - 4 Inch
- etrailer
more information >
Continue Researching
- Q&A: Will Air Lift LoadLifter 5000 Air Helper Springs AL38FF Fit 2022 Ford Bronco With Sasquatch Package?
- Q&A: Replacement Hub/Drum and Bearings for 2006 Carmate Trailer With Dexter 8-247 Assembly
- Q&A: How to Bypass the Factory Brake Controller w/a Bad Module on a 2014 Chevy Silverado 2500
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Hubs for a Triton 08351 PWC Trailer Axle
- Q&A: Replacement Axle and Leaf Springs for Pace American Enclosed Trailer
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Axle w/ Drop for an Old Trailer
- Article: Aftermarket Brake Control Wiring for 07-13 GM Full-Size Truck with Factory-Integrated Brake Control
- Article: Trailer Lighting Requirements
- Article: How to Measure Your Trailer Wheel Bolt Pattern