What Causes Signal to Drop on Furrion Vision S Wireless RV Backup Camera System While Driving

Updated 10/17/2022 | Published 10/15/2022

Products Featured in This Question

Furrion Vision S Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen

(731)

$470.69

Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems

(408)

$16.72

Question:

All cameras are paired, when we stop they work but once on road the rear one freezes then loss of signal. We re-pair it and the same thing happens. Need help please!

asked by: Carol

Expert Reply:

In regards to the Furrion Vision S Wireless RV Backup Camera System part # FOS43TASF, there are a few things that can cause the rear camera to lose signal while traveling. I first recommend checking the antenna on the camera to ensure it's pointed towards the monitor as best as possible. It may also be necessary to move the camera and or monitor to a clearer line of sight from one another. If the truck or trailer has aluminum panels like an F-150 or Airstream this can cause signal interference, make sure all electronics inside the trailer are powered down as well. It's possible that you need a new antenna if there is corrosion so that may be a last ditch effort as well if the above don't fix the issue, you'll need the Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems part # 772577 for this.

expert reply by: Conner L