Correct Replacement Tuson Slide Out Gear Motor for Tiffin Phaeton

Question

Question:

My 2013 Tiffin Phaeton has a Lippert Tuson motor-gear assembly on the bedroom slide which has failed. I am being told by others that the tuson assembly is no longer available and that the Venture assembly will work as a replacement. Is this a correct statement? See attached photos. Thanks,

asked by: Dale W

0

Expert Reply:

We actually do still offer the Tuson motor assembly, it's the Replacement 18:1 Tuson Motor for Lippert Through-Frame Slide-outs part # LC125802. It looks to be correct as well just based on the provided photo.

expert reply by: Conner L

0

Correct Replacement Tuson Slide Out Gear Motor for Tiffin Phaeton
(click to enlarge)

Answer 1

We have had this question before and according to Lippert the replacement for your actuator and slide out motor 131903 is the Lippert Venture Actuator and High Speed Slide-Out Motor item #LC168956 or the Replacement 18:1 High Speed Motor Assembly…

view full answer...

Answer 2

Thank you for the picture! This does look like the same motor as the #LC236575 but I was able to get some information from Tiffin and it appears that your 2014 Tiffin Phaeton slideout motor actually has the high torque 500:1 gear ratio, so you would…

view full answer...

Answer 3

I spoke with Lippert and confirmed that the 18:1 Tuson Motor #LC125802 would be the correct replacement for the slide out motor in your 2007 Keystone Cougar fifth wheel. Thank you for the info and picture you sent over!

view full answer...

Answer 4

Hey Jerry, great question! Yes, if you found another slide out that is rated for only 5,000 RPM then you'll be cutting the movement of the slide just about in half. The Lippert Venture Actuator and High Speed Slide-Out Motor #LC168956 that…

view full answer...

Answer 5

The gearbox and motor do not come separately therefore you will need to purchase them both together as a whole. The correct replacement motor and gearbox for your trailer with a Thompson Motor/Gearbox 7828696 is the Replacement 18:1 Tuson Motor for…

view full answer...

Answer 6

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Dexter axles are the industry leader in terms of overall quality. They are made in the USA and if you look around online or talk to people in the RVing community they general consensus is the Dexter axles are just better made overall and will be more…

view full answer...

Answer 9

Hi Tina; the Thomas Payne RV Jackknife Sofa and Kickboard - Fold Down - 62" Wide - McCoy #TP34AR uses a PolyHyde polyester which is specifically designed to combat the flaking you have experienced. It won't hold up forever, but it does tend…

view full answer...

Answer 10

Hey Nick, thanks for reaching out. Yes, the Replacement Fabric for etrailer Powered RV Awnings #e96QV will work with other brands of awning like Solera or Dometic which are what we commonly see on campers like your 2011 Forest River Cherokee 29U. The…

view full answer...

Answer 11

Hey Jared, the pass through amp rating of the Rich Solar NOVA 3K12 3000W 12V Pure Sine Wave Inverter with Built-in Transfer Switch for RVs #RS79VR is 30 amps. What AC units do you have? This should be more than enough for that.

view full answer...

Correct Replacement Tuson Slide Out Gear Motor for Tiffin Phaeton

Product Page this Question was Asked From

Continue Researching