See what our Experts say about this Lippert RV Slide Out Parts

• Replacement Motor for Slide Out Motor with Part # 8532-18HT
  Thanks for the info you listed. Based on that the correct replacement motor is the part # LC295380.
  view full answer...
• Replacement Motor For A Thompson Saginaw Part No. 7831293
  I spoke with my contact at Lippert and the replacement motor you'll need for your Thompson Saginaw Part No. 7831293 is the Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out # LC295380.
  view full answer...
• Can I get Replacement Parts for Lippert Motor LC295380
  Hey, Chris. After doing some research and checking with Lippert, It looks like the only replacement part they have for the Venture Actuator and High Speed Slide-Out Motor, part # LC168956 is the motor itself, part # LC295380. In my searching It looks like quite a number of people have been asking for replacement parts without a whole replacement but were told the same thing Lippert told me.
  view full answer...
• Replacement Slide Out Motor for a 2011 CrossRoads Zinger
  Hey Matt! I spoke with my contact at Lippert and they're needing some photos of the motor, including any and all data tags on the motor itself. They aren't able to find anything with the part number 080300994 that you sent me. You can send any photos in a reply to the email you received from me!
  view full answer...
• Replacement Slideout Motor for a 2016 Grand Design Reflection 337RLS w/a Schwintek System
  Hey Lester. The 2016 Grand Design Reflection 337RLS uses a Schwintek system. The motor should be located at the top of the vertical column on either side of the slide-out, which is accessible from the outside. You'll need to pull back the rubber T-molding or exterior wiper seal. To replace just the motor, you'll need the Replacement 18:1 High Speed Motor Assembly item # LC295380. If you need the actuator and the motor, you'll need item # LC168956. What kind of issues are you having with...
  view full answer...
• Replacement for Lippert Slide Out Motor 131903
  We have had this question before and according to Lippert the replacement for your actuator and slide out motor 131903 is the Lippert Venture Actuator and High Speed Slide-Out Motor item # LC168956 or the Replacement 18:1 High Speed Motor Assembly item # LC295380 for just the motor. It has a RPM rating of 9,100 and a gear ratio of 18:1.
  view full answer...
• Will Damage or Problems Happen if Lower RPM 18:1 Slide Out Motor is Used
  Hey John, thanks for reaching out! Aside from the Motor # LC132682 operating slower than the Motor # LC295380, there shouldn't be any problems or possible damage because these have the same 18:1 gear ratio and power settings.
  view full answer...
• Replacement for Lippert Slide-Out Motor on 2016 Grand Design Reflection 337RLS
  Hey Pepper! We have the motor you need but it is not the # TUS24FR. The # LC168956 you referenced is the Lippert Venture Actuator and High Speed Slide-Out Motor. Since you just need the motor the correct replacement part is the # LC295380. If you have any other questions don't hesitate to reach out in the comments below.
  view full answer...
• Is Motor-Only Available From Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor Kit
  Yes, if you just need the motor from the Lippert Replacement RV Slide-Out Venture Actuator with 18:1 Motor # LC119128 then you'll need to get the following: - Replacement 18:1 High Speed Motor Assembly # LC295380
  view full answer...
• Troubleshooting A Slide-Out Motor That Isn't Turning The Slide-Out Actuator
  Based on the noise I'm hearing from your video it sounds like your gears may be stripped out. If the # LC295380 wasn't working you wouldn't hear the knocking that you're getting or see the shaft turn. First, I recommend removing the motor and then removing the base cover (pictured below). There are gears inside that turn to activate the shaft that connects to the actuator. You'll also want to check the shear pin, which slides through the shaft to turn the actuator. If it's damaged that...
  view full answer...
  
• Replacement 168956 Slide-Out Motor For A Keystone Arcadia 5th Wheel Trailer
  To replace your 168956 slide out motor you'll need the Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out # LC295380. The gear pack will depend on the dimensions of the inner arms; if your inner arms measure 2" x 2" then you'll need the Lippert 2 X 2 Slide-Out Gear Pack Without Roll Pins Assembly # LC281331. If they measure 2.5" x 2.5" then you'll need the Lippert Components 2.5 x 2.5 Heavy Duty RV Slide-Out Gear Pack - Steel Rollers # LC123356. I...
  view full answer...
• Troubleshooting A Loose Slide Out Motor Mounting Screw
  There is a gear in the housing of the Replacement 18:1 Venture Motor and Driveshaft with Right Angle Gear Box # LC117292 right by where you would bore through so you run the risk of it interfering with the operation of the motor. You'd also break through without a gasket to seal up the housing so the internal components could be compromised by the elements. You'd also be voiding any warranty you have with the manufacturer so I can't recommend this route. You can replace just the motor...
  view full answer...
• What is the Warranty on the Lippert Replacement 18:1 High Speed Motor 295380
  Parts like the Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out # LC295380 will have a 1 year limited warranty against manufacturing defects.
  view full answer...
• Can Motor for Lippert Components Venture Actuator and Slide-Out Be Purchased Seperate
  The Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out part # LC295380 is only offered by Lippert as a complete unit with the motor and gear. The motor is not available separately from Lippert.
  view full answer...
• Replacement Motor for 8532-18HT On 2022 Rockwood Ultra Lite 2608BS
  Hey Tommy! The replacement for your 8532-18HT is the Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out # LC295380. We have the motor with the actuator as well, which is the # LC168956. We do have these in stock, and the price is listed at the top of this page on the parts. Once you go through the checkout process you will be able to have an idea on estimated arrival based on where you live. Any big trips coming up with the Rockwood once...
  view full answer...
• How To Determine Which Wire Is Power And Ground When Installing A Venture Slide-Out Motor
  The red wire on the Replacement 18:1 High Speed Motor Assembly for Lippert Components Venture Actuator and Slide-Out # LC295380 is your power and the black is your ground. You'll need to test your white and white/purple wires with a multimeter # PT89ZR to determine which is your power wire and which is your ground. If both wires are showing 0v then have someone press the control button for the slide-out either in or out so that power is sent to the wire.
  view full answer...

Do you have a question about this RV Slide Out Part?