Replacement 18 Inch Shank For Weight Distribution Hitch

Question

Question:

Hello my shank is 18 inches long and 14 inches from pin hole to bolt hole, I think Reese makes a 3214 that is the same and Curt makes a 17122 that is the same, BUT I am not sure can you tell me if this is true so I can order one.

asked by: DAVE O

0

Expert Reply:

We have the perfect replacement weight distribution shank for you!

The Curt Weight Distribution Shank # C17122 is 18 inches long and from center of pin hole to center of bolt hole is 14 inches. The shank has a weight capacity up to 15,000 pounds and a tongue weight up to 1,500 pounds. The shank has a black powder coated steel that helps resist rust and corrosion.

I attached a review video link below.

expert reply by: Noah E

0

Curt Shank Dimensions
(click to enlarge)

Answer 1

The Reese Weight Distribution Shank #RP69FR has 3/4" bolt holes spaced 1-1/4" apart (center on center) which is fairly standard. I don't know for sure what the specs for your EZ-Lift system's hitch head are (we don't currently…

view full answer...

Answer 2

Hello William, thanks for reaching out. Yes, a longer shank can help your situation. This will move the trailer farther from the truck and create more space between the jack and the tailgate. Most weight distribution shanks are 8" long or…

view full answer...

Answer 3

I would be happy to help! First the Curt MV Weight Distribution Hitch #C17050 you were looking at would be a bit stiff with the 440lb tongue weight you mentioned for your 16' Airstream, but is that figure what Airstream lists as the tongue…

view full answer...

Answer 4

Hi Jeff! I do have a couple solutions for you, however you won't be able to use a separate hitch extender with your Equal-i-zer Weight Distribution System when towing. The kind of torque that a weight distribution system puts on the hitch…

view full answer...

Answer 5

We have just what you need in the #JWM60A as yes they have the same cut out size of 9" wide x 6" tall x 5-1/2" deep. The Jensen #JWM60A is actually a replacement for the older Jensen AWM965 stereo so this will work well for you. The…

view full answer...

Answer 6

Your Jensen RV stereo can connect to the Jensen TV part #JTV4015DC. You can also connect Netflix and Hulu to it as well by using a Roku that would connect with an HDMI cable.

view full answer...

Answer 7

We do still carry the replacement brake pads for the Reese SC as part #58512, however Reese no longer offers the outer link plates or any other replacement parts for the Reese SC system as it was discontinued in 2018. Other than the brake pads, any…

view full answer...

Answer 8

The Reese Steadi-Flex Weight Distribution System w/ Sway Control #RP66559 will not be effected by the air suspension in your 2013 Ram 1500. That air suspension levels the bed of your truck for more comfortable travel, but the weight distribution and…

view full answer...

Answer 9

This is a great question that there isn't exactly a great answer for. Hitch extenders not only put the weight further away from the hitch which would increase the leverage on the hitch, but they also add movement to the assembly which will…

view full answer...

Answer 10

The Husky Center Line Weight Distribution with Sway Control 32217 is for 600 lb to 800 lb total tongue weight capacities (the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow…

view full answer...

Answer 11

Based on the numbers you gave, the Reese Strait-Line #RP66084 is likely going to be the right system for you, but you are going to need to make sure by figuring your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready…

view full answer...

Answer 12

Reese has updated their weight distribution systems a few times over the years. It is odd that the socket size changed but for the Strait Line system part #RP66083 the correct hardware kit you'd need is the #58133.

view full answer...