Will The Trailer Idler Axle Beam Work With Dexter 8-01A Hubs?
Updated 09/28/2022 | Published 09/25/2022
Products Featured in This Question
Question:
Will Item # e48GR axle fit my existing hubs which are Dexter 8-01A, 4 on 4?
asked by: Tim
0
Expert Reply:
I wasn't able to find any information on your Dexter hubs, however the Trailer Idler Axle Beam with Easy Grease Spindles # e48GR that you mention will work with a Replacement Trailer Hub Bearing # L44649 and the Grease Seal # 58846.
So, as long as your Dexter 8-01A hubs have the same measurements, this should fit with no issues.
expert reply by:
Bryce D
0
Product Page this Question was Asked From
Trailer Idler Axle Beam with Easy Grease Spindles - 60" Long - 2,000 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- 48 Inch Spring Center
- 60 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Determine Correct Slipper Spring Replacement for 1,500 lb Axle
- Q&A: Recommended Slipper Spring for Custom Kayak Trailer
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: What is Backspacing of Kenda Karrier KR53 ST205/75R15 Radial Trailer Tire with 15" White Mod Wheel
- Q&A: Replacement Leaf Springs for Harbor Freight Folding Trailer
- Q&A: How To Convert Trailer With Slipper Springs To Double Eye Springs
- Q&A: How to Determine if 4-Lug Trailer Hubs can be Changed to 5-Lug Trailer Hubs
- Q&A: Replacement Leaf Springs for 2020 Gulf Stream Vista Cruiser 19ERD
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: How to Measure a Trailer Axle
- Article: Trailer Lighting Requirements