Replacement Hinge for Sears Sport 20-SV Cargo Box

Question

Question:

I have a sears sport 20-sv cargo carrier with a broken prop hinge. By chance do you guys have replacements? Thanks

asked by: Scott R

1

Helpful Expert Reply:

The hinge we offer that we know fits Sears 20-SV cargo boxes is the part # TH14936 which fits both sides of the cargo box.

expert reply by: Jameson C

1

Answer 1

The Replacement Dual Force Strut for Thule Roof Box #TH14933 will fit your Sears SUV20 cargo box. It is recommended to change both at the same time to have a better performance out of the hinge. These are a universal hinge confirmed to fit by the…

view full answer...

Answer 2

We do in fact have the replacement hardware for your Sears X-Cargo carrier. You will need the Replacement Hardware Kit for Searsbox Cargo Box #TH05603 which includes everything you need to get your Sears X-Cargo back on the road. No drilling would be…

view full answer...

Answer 3

Thank you for the photo of the hinge you need to replace on your Sears X-Cargo Box. The replacement hinge you need is part #SR03810. This item is ordered individually so I recommend you check the other side to make sure it doesn't need to also be…

view full answer...

Answer 4

I wish we could help but we don't have any recommended ways to help allow the lid of your box to open higher.

view full answer...

Answer 5

The difference between the Thule hinges or struts #TH14936 and #TH14933 is the spring tension. Both of these hinges will work for your Sears X Cargo Sport 20 lid. However, the #TH14936 includes better springs.

view full answer...

Answer 6

I spoke with my contact at Thule and was informed that for the Sears branded Sport 20-SV cargo box you would need to use hinge #TH14936. My contact also stated that both hinges should be changed at the same time for best performance. I have linked a…

view full answer...

Answer 7

We can help you with a replacement hinge for your Sears X-Cargo which is the part #TH14936 but we don't have the rivets your box would need. If the hinge mount is gone or needs to be riveted back in place we wouldn't have anything that would…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Replacement Hinge for Sears Sport 20-SV Cargo Box

Product Page this Question was Asked From

Continue Researching