Can 4,000 lb Leaf Springs be Flipped to Sit on Top of Axle
Updated 07/22/2022 | Published 07/21/2022 >
Products Featured in This Question
Question:
The center bolt on some leaf springs I just received have the nut on the bottom. Can I flip them so the round part fits in the hole of my axle? If so, what is the torque spec and the best method for gripping the round fastener head? I have the 4000 lb 4 leaf springs. Thank you!
asked by: Matt A
Expert Reply:
Yes, you can flip the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles # e22YR so they are on top of your axle. You'll need an over/under conversion kit, though the nut on the bottom won't fit in the hole of your axle, it'll fit in the spring seat of the conversion kit. The correct kit will depend on what diameter your axle is (though it is likely 2-3/8" you'll want to verify this):
- 2-3/8" Diameter Axle: Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00
- 3" Diameter Axle: Dexter Trailer Springs Over-Under Conversion Kit # K71-385-00
The center bolt won't get torqued but the new U-bolts will, and I have attached links below to both the instructions (which have the torque specs) and an installation video which detail the entire process.
Product Page this Question was Asked From
4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 9/16 Inch Eye
- Nylon Bushing
- 4000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26 Inch Long
- Standard Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer leaf springs
- Video: etrailer 4-Leaf Double-Eye Spring Complete Installation - Utility Trailer
- Video: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles Spec Review
- Shop: 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 26" Long
- Shop: Shackle Bolt with Locknut for Double-Eye Springs - 3" Long
- Q&A: Torque Specs for U-Bolts with 3,500 Pound 4-Leaf Double-Eye Springs
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Video: How To Choose Camper Leaf Springs
- Q&A: Can I Use Heavier Rated Leaf Springs on Trailer Without Causing Damage
- Shop: Trailer Wiring
- Article: How to Accurately Measure Trailer Leaf Springs
- Shop: Trailer Wheel Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Search Results: trailer tires and wheels
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: trailer wiring
- Q&A: What is the Difference Between the MORryde CRE3000 and AllTrek 4000 Suspension Kits
- Shop: Suspension Enhancement
- Article: How to Tell the Weight Rating of a Trailer Axle
- Video: Hands-On with the Hub Saver Hub and Wheel Protector
- Search Results: trailer jack
- Shop: Brake Controller
- Shop: Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Q&A: Replacement Leaf Springs, Bronze Bushings, and U-Bolts for 3,500 lb Dexter Axles
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Video: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles: The Breakdown



