Bearing Kit with Dust Cap that Fits Lippert 3,500 lb Trailer Axle

Updated 07/20/2022 | Published 07/18/2022

Products Featured in This Question

Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

(2944)

$15.39

Bearing Kit for Trailer Brakes w/ 8" or 10" Hub/Rotor - EZ-Lube - 3,500 lbs

(39)

$47.24

Question:

I am looking for seals, bearings, and a few dust caps for my utility trailer that is outfitted with 3500 Lippert Axles. At least one of these is a brake axle. They both may be. I have a picture of the manufacturing label if that helps. I just cannot attach here. Can you recommend some parts? I have a few guesses in my cart now

asked by: Don R

Expert Reply:

Since you have 3,500 lb trailer axles from Lippert the correct bearing kit is the part # BK2-100. This comes with bearings, races, and a seal for each hub plus a cotter pin and tang washer. Or we have the part # DBRKHW35EZ which comes with the correct bearings, seals, lug nuts, and dust covers for both sides of a 3,500 lb axle like you have. If you don't need the races or cotter pins (you probably don't) this would be the way to go.

expert reply by: Jameson C